Re: [PATCH v9 11/19] scsi: sd: Translate data lifetime information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tue, Jan 30, 2024 at 01:48:37PM -0800, Bart Van Assche kirjoitti:
> Recently T10 standardized SBC constrained streams. This mechanism allows
> to pass data lifetime information to SCSI devices in the group number
> field. Add support for translating write hint information into a
> permanent stream number in the sd driver. Use WRITE(10) instead of
> WRITE(6) if data lifetime information is present because the WRITE(6)
> command does not have a GROUP NUMBER field.

This patch broke very badly my connected Garmin FR35 sport watch. The boot time
increased by 1 minute along with broken access to USB mass storage.

On the reboot it takes ages as well.

Revert of this and one little dependency (unrelated by functional means) helps.

Details are here: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/60

P.S. Big thanks to Arch Linux team to help with bisection!

Note, from tomorrow I will be off from the HW in question for 2+ months, I can
test anything back in mid-August, but I hope you may do something about it
without my participation.

-- 
With Best Regards,
Andy Shevchenko






[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux