Re: [PATCH 03/11] block: remove the BIP_IP_CHECKSUM flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Christoph,

Sorry about the delay. Travel got in the way.

>> On the wire between controller and target there's only CRC. If I want to
>> write a "bad" CRC to disk, I have switch the controller to CRC mode. The
>> controller can't convert a "bad" IP checksum to a "bad" CRC. The PI test
>> tooling relies heavily on being able to write "bad" things to disk and
>> read them back to validate that we detect the error.
>
> But how do you even toggle the flag?  There is no no code to do that.
> And if you already have a special kernel module for that it really
> should just use a passthrough request to take care of that.

A passthrough command to the controller?

> Note that unlike the NOCHECK flag which I just cleaned up because they
> were unused, this one actually does get in the way of the architecture
> of the whole series :( We could add a per-bip csum_type but it would
> feel really weird.

Why would it feel weird? That's how it currently works.

The qualification tool issues a flurry of commands injecting errors at
various places in the stack to identify that the right entity (block
layer, controller, storage device) catch a bad checksum, reference tag,
etc. Being able to enable/disable checking at each place in the stack is
important. I also have code for target that does the same thing in the
reverse direction.

-- 
Martin K. Petersen	Oracle Linux Engineering




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux