Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29.05.24 16:36, Linux regression tracking (Thorsten Leemhuis) wrote:
> [CCing the regression list, as it should be in the loop for regressions:
> https://docs.kernel.org/admin-guide/reporting-regressions.html]
> 
> On 20.05.24 17:15, Christoph Hellwig wrote:
>> Adding ben and the linuxppc list.
> 
> Hmm, no reply and no other progress to get this resolved afaics. So lets
> bring Michael into the mix, he might be able to help out.
> 
> BTW TWIMC: a PowerMac G5 user user reported similar symptoms here
> recently: https://bugzilla.kernel.org/show_bug.cgi?id=218858

And yet another report with similar symptoms, this time with a
"PowerMac7,2 PPC970 0x390202 PowerMac":
https://bugzilla.kernel.org/show_bug.cgi?id=218905

Ciao, Thorsten

>> Context: pata_macio initialization now fails as we enforce that the
>> segment size is set properly.
>>
>> On Wed, May 15, 2024 at 04:52:29PM -0700, Guenter Roeck wrote:
>>> pata_macio_common_init() Calling ata_host_activate() with limit 65280
>>> ...
>>> max_segment_size is 65280; PAGE_SIZE is 65536; BLK_MAX_SEGMENT_SIZE is 65536
>>> WARNING: CPU: 0 PID: 12 at block/blk-settings.c:202 blk_validate_limits+0x2d4/0x364
>>> ...
>>>
>>> This is with PPC_BOOK3S_64 which selects a default page size of 64k.
>>
>> Yeah.  Did you actually manage to use pata macio previously?  Or is
>> it just used because it's part of the pmac default config?
>>
>>> Looking at the old code, I think it did what you suggested above,
>>
>>> but assuming that the driver requested a lower limit on purpose that
>>> may not be the best solution.
>>
>>> Never mind, though - I updated my test configuration to explicitly
>>> configure the page size to 4k to work around the problem. With that,
>>> please consider this report a note in case someone hits the problem
>>> on a real system (and sorry for the noise).
>>
>> Yes, the idea behind this change was to catch such errors.  So far
>> most errors have been drivers setting lower limits than what the
>> hardware can actually handle, but I'd love to track this down.
>>
>> If the hardware can't actually handle the lower limit we should
>> probably just fail the probe gracefully with a well comment if
>> statement instead.




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux