In the recent discussion for nvme test group [1], two pain points were mentioned regarding the test case runs. 1) Several test cases in nvme test group do exactly the same test except the NVME transport backend set up condition difference (device vs. file). This results in duplicate test script codes. It is desired to unify the test cases and run them repeatedly with the different conditions. 2) NVME transport types can be specified with nvme_trtype parameter so that the same tests can be run for various transport types. However, some test cases do not depend on the transport types. They are repeated in multiple runs for the various transport types under the exact same conditions. It is desired to repeat the test cases only when such repetition is required. [1] https://lore.kernel.org/linux-block/w2eaegjopbah5qbjsvpnrwln2t5dr7mv3v4n2e63m5tjqiochm@uonrjm2i2g72/ One idea to address these pain points is to add the test repeat feature to the nvme test group. However, Daniel questioned if the feature could be implemented in the blktests framework. Actually, a similar feature has already been implemented to repeat some test cases for non-zoned block devices and zoned block devices. However, this feature is implemented only for the zoned and non- zoned device conditions. It can not fulfill the desires for nvme test group. This series proposes to generalize the feature in the blktests framework to repeat the test cases with different conditions. Introduce a new function set_conditions() that each test case can define and instruct the framework to repeat the test case. This series applies this feature to nvme test group so that the test cases can be repeated for NVME transport types and backend types in the ideal way. For this purpose, this series introduces new config parameters NVMET_TRTYPES and NVMET_BLKDEV_TYPES. Taking this chance, it renames other lowercase config parameters nvme_img_size, nvme_num_iter and use_rxe to uppercase to follow the guide for environment variables. The first four patches introduce the feature and apply it to the repetition for non-zoned and zoned block devices. The fifth patch introduces a helper function to prepare config parameter rename to uppercase. The following seven patches apply the test case repeat feature to nvme group. Three of the seven patches are reused from the work by Daniel. The last three patches rename the config parameters. The all patches are listed in the order that does not lose the test coverage with the default set up. As an example of the repeated test run, let's say NVMET_TRTYPES and NVMET_BLKDEV_TYPES are defined in the config file as follows: NVMET_TRTYPES="loop rdma tcp" NVMET_BLKDEV_TYPES="device file" In this case, the test cases which depend on these parameters are repeated 3 x 2 = 6 times. For example, nvme/006 is repeated as follows. nvme/006 (nvmet bd=device tr=loop) (create an NVMeOF target) [passed] runtime 0.148s ... 0.165s nvme/006 (nvmet bd=device tr=rdma) (create an NVMeOF target) [passed] runtime 0.273s ... 0.235s nvme/006 (nvmet bd=device tr=tcp) (create an NVMeOF target) [passed] runtime 0.162s ... 0.164s nvme/006 (nvmet bd=file tr=loop) (create an NVMeOF target) [passed] runtime 0.138s ... 0.134s nvme/006 (nvmet bd=file tr=rdma) (create an NVMeOF target) [passed] runtime 0.216s ... 0.201s nvme/006 (nvmet bd=file tr=tcp) (create an NVMeOF target) [passed] runtime 0.154s ... 0.146s Changes from v2: * 5th patch: added to prepare for the parameter rename * 6th patch: modified nvme_trtype description and added NVMET_TRTYPES check * 13-15th patches: added for the parameter rename * Applied Reviewed-by tags * Rebased to the latest master branch tip Changes from v1: * Renamed NVMET_TR_TYPES to NVMET_TRTYPES * 1st patch: reflected comments on the list and added Reviewed-by tag * 5th patch: changed NVMET_TRTYPES from array to variable * 7th patch: changed NVMET_BLKDEV_TYPES from array to variable * Reflected other comments on the list Daniel Wagner (3): nvme/rc: add blkdev type environment variable nvme/{007,009,011,013,015,020,024}: drop duplicate nvmet blkdev type tests nvme/{021,022,025,026,027,028}: do not hard code target blkdev type Shin'ichiro Kawasaki (12): check: factor out _run_test() check: support test case repeat by different conditions check: use set_conditions() for the CAN_BE_ZONED test cases meta/{016,017}: add test cases to check repeated test case runs common/rc: introduce _check_conflict_and_set_default() nvme/rc: introduce NVMET_TRTYPES nvme/rc: introduce NVMET_BLKDEV_TYPES nvme/{002-031,033-038,040-045,047,048}: support NMVET_TRTYPES nvme/{006,008,010,012,014,019,023}: support NVMET_BLKDEV_TYPES nvme/{rc,010,017,031,034,035}: rename nvme_img_size to NVME_IMG_SIZE nvme/{rc,016,017}: rename nvme_num_iter to NVME_NUM_ITER nvme/rc,srp/rc,common/multipath-over-rdma: rename use_rxe to USE_RXE Documentation/running-tests.md | 33 ++++++--- Makefile | 3 +- check | 129 ++++++++++++++++++++++----------- common/multipath-over-rdma | 5 +- common/rc | 27 +++++++ common/shellcheck | 2 +- common/zoned | 22 ++++++ new | 21 ++++++ tests/meta/016 | 29 ++++++++ tests/meta/016.out | 2 + tests/meta/017 | 29 ++++++++ tests/meta/017.out | 2 + tests/nvme/002 | 4 + tests/nvme/003 | 4 + tests/nvme/004 | 4 + tests/nvme/005 | 4 + tests/nvme/006 | 8 +- tests/nvme/007 | 27 ------- tests/nvme/007.out | 2 - tests/nvme/008 | 8 +- tests/nvme/009 | 36 --------- tests/nvme/009.out | 3 - tests/nvme/010 | 10 ++- tests/nvme/011 | 39 ---------- tests/nvme/011.out | 3 - tests/nvme/012 | 8 +- tests/nvme/013 | 43 ----------- tests/nvme/013.out | 3 - tests/nvme/014 | 8 +- tests/nvme/015 | 48 ------------ tests/nvme/015.out | 4 - tests/nvme/016 | 6 +- tests/nvme/017 | 8 +- tests/nvme/018 | 4 + tests/nvme/019 | 8 +- tests/nvme/020 | 40 ---------- tests/nvme/020.out | 4 - tests/nvme/021 | 10 ++- tests/nvme/022 | 10 ++- tests/nvme/023 | 8 +- tests/nvme/024 | 40 ---------- tests/nvme/024.out | 2 - tests/nvme/025 | 10 ++- tests/nvme/026 | 10 ++- tests/nvme/027 | 10 ++- tests/nvme/028 | 10 ++- tests/nvme/029 | 4 + tests/nvme/030 | 4 + tests/nvme/031 | 6 +- tests/nvme/033 | 4 + tests/nvme/034 | 6 +- tests/nvme/035 | 8 +- tests/nvme/036 | 4 + tests/nvme/037 | 4 + tests/nvme/038 | 4 + tests/nvme/040 | 4 + tests/nvme/041 | 3 + tests/nvme/042 | 3 + tests/nvme/043 | 3 + tests/nvme/044 | 3 + tests/nvme/045 | 3 + tests/nvme/047 | 4 + tests/nvme/048 | 4 + tests/nvme/rc | 74 ++++++++++++++++--- tests/srp/rc | 2 +- 65 files changed, 493 insertions(+), 404 deletions(-) create mode 100644 common/zoned create mode 100755 tests/meta/016 create mode 100644 tests/meta/016.out create mode 100755 tests/meta/017 create mode 100644 tests/meta/017.out delete mode 100755 tests/nvme/007 delete mode 100644 tests/nvme/007.out delete mode 100755 tests/nvme/009 delete mode 100644 tests/nvme/009.out delete mode 100755 tests/nvme/011 delete mode 100644 tests/nvme/011.out delete mode 100755 tests/nvme/013 delete mode 100644 tests/nvme/013.out delete mode 100755 tests/nvme/015 delete mode 100644 tests/nvme/015.out delete mode 100755 tests/nvme/020 delete mode 100644 tests/nvme/020.out delete mode 100755 tests/nvme/024 delete mode 100644 tests/nvme/024.out -- 2.44.0
