[PATCH 19/23] pata_macio: switch to using ->device_configure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Switch to the ->device_configure method instead of ->slave_configure
and update the block limits on the passed in queue_limits instead
of using the per-limit accessors.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Acked-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
---
 drivers/ata/pata_macio.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 4ac854f6b05777..f046bfa5c6e7f6 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -796,7 +796,8 @@ static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
 /* Hook the standard slave config to fixup some HW related alignment
  * restrictions
  */
-static int pata_macio_slave_config(struct scsi_device *sdev)
+static int pata_macio_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct pata_macio_priv *priv = ap->private_data;
@@ -814,7 +815,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 
 	/* OHare has issues with non cache aligned DMA on some chipsets */
 	if (priv->kind == controller_ohare) {
-		blk_queue_update_dma_alignment(sdev->request_queue, 31);
+		lim->dma_alignment = 31;
 		blk_queue_update_dma_pad(sdev->request_queue, 31);
 
 		/* Tell the world about it */
@@ -829,7 +830,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 	/* Shasta and K2 seem to have "issues" with reads ... */
 	if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
 		/* Allright these are bad, apply restrictions */
-		blk_queue_update_dma_alignment(sdev->request_queue, 15);
+		lim->dma_alignment = 15;
 		blk_queue_update_dma_pad(sdev->request_queue, 15);
 
 		/* We enable MWI and hack cache line size directly here, this
@@ -918,7 +919,7 @@ static const struct scsi_host_template pata_macio_sht = {
 	 * use 64K minus 256
 	 */
 	.max_segment_size	= MAX_DBDMA_SEG,
-	.slave_configure	= pata_macio_slave_config,
+	.device_configure	= pata_macio_device_configure,
 	.sdev_groups		= ata_common_sdev_groups,
 	.can_queue		= ATA_DEF_QUEUE,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
-- 
2.39.2





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux