On Fri, Mar 29, 2024 at 01:10:57PM +0100, Christian Brauner wrote:
> On Fri, Mar 29, 2024 at 04:56:07AM +0000, Matthew Wilcox wrote:
> > On Sat, Mar 23, 2024 at 05:11:19PM +0100, Christian Brauner wrote:
> > > Last kernel release we introduce CONFIG_BLK_DEV_WRITE_MOUNTED. By
> > > default this option is set. When it is set the long-standing behavior
> > > of being able to write to mounted block devices is enabled.
> > >
> > > But in order to guard against unintended corruption by writing to the
> > > block device buffer cache CONFIG_BLK_DEV_WRITE_MOUNTED can be turned
> > > off. In that case it isn't possible to write to mounted block devices
> > > anymore.
> > >
> > > A filesystem may open its block devices with BLK_OPEN_RESTRICT_WRITES
> > > which disallows concurrent BLK_OPEN_WRITE access. When we still had the
> > > bdev handle around we could recognize BLK_OPEN_RESTRICT_WRITES because
> > > the mode was passed around. Since we managed to get rid of the bdev
> > > handle we changed that logic to recognize BLK_OPEN_RESTRICT_WRITES based
> > > on whether the file was opened writable and writes to that block device
> > > are blocked. That logic doesn't work because we do allow
> > > BLK_OPEN_RESTRICT_WRITES to be specified without BLK_OPEN_WRITE.
> > >
> > > So fix the detection logic. Use O_EXCL as an indicator that
> > > BLK_OPEN_RESTRICT_WRITES has been requested. We do the exact same thing
> > > for pidfds where O_EXCL means that this is a pidfd that refers to a
> > > thread. For userspace open paths O_EXCL will never be retained but for
> > > internal opens where we open files that are never installed into a file
> > > descriptor table this is fine.
> > >
> > > Note that BLK_OPEN_RESTRICT_WRITES is an internal only flag that cannot
> > > directly be raised by userspace. It is implicitly raised during
> > > mounting.
> > >
> > > Passes xftests and blktests with CONFIG_BLK_DEV_WRITE_MOUNTED set and
> > > unset.
> > >
> > > Fixes: 321de651fa56 ("block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access")
> > > Reported-by: Matthew Wilcox <willy@xxxxxxxxxxxxx>
> > > Link: https://lore.kernel.org/r/ZfyyEwu9Uq5Pgb94@xxxxxxxxxxxxxxxxxxxx
> > > Signed-off-by: Christian Brauner <brauner@xxxxxxxxxx>
> >
> > So v1 of this patch works fine. I just got round to testing v2, and it
> > does not. Indeed, applying 2/2 causes root to fail to mount:
> >
> > /dev/root: Can't open blockdev
> > List of all bdev filesystems:
> > ext3
> > ext2
> > ext4
> > xfs
> >
> > Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,0)
> >
> > Applying only 1/2 boots but fails to fix the bug.
>
> Thanks for testing this. This is odd because I tested with the setup you
> provided.
>
> I used the kernel config you sent to me in [2] with an xfs root device
> with direct kernel boot and the following xfstests config in [3]. I'm
> booting the vm with:
>
> qemu-system-x86_64 -machine type=q35 -smp 1 -m 4G -accel kvm -cpu max -nographic -nodefaults \
> -chardev stdio,mux=on,id=console,signal=off -serial chardev:console -mon console \
> -kernel /home/ubuntu/data/mkosi-kernel2/mkosi.output.debian/image.vmlinuz \
> -drive file=/home/ubuntu/data/mkosi-kernel2/mkosi.output.debian/image.raw,format=raw,if=virtio \
> -append "console=ttyS0 root=/dev/vda2 module_blacklist=vmw_vmci systemd.tty.term.ttyS0=screen-256color systemd.tty.columns.ttyS0=96 systemd.tty.rows.ttyS0=46 debug loglevel=4 SYSTEMD_"
>
> Note that the config you gave me in [2] didn't include
> CONFIG_SCSI_VIRTIO=y which means I got the splat you did. I added this
> missing config option and everything worked fine for me.
>
> Can you please test what's in the vfs.fixes branch on
> https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs.git so we're
> sure that we're testing the same thing?
Willy, can you still reproduce this? I've been delaying the pull request
to give you time to verify this but I would really like to send it
before Friday. So it'd be really great if you could get back to me on
this.
>
> The failures that I see are:
>
> Failures: generic/042 generic/645 generic/682 generic/689 xfs/014
> xfs/017 xfs/049 xfs/129 xfs/176 xfs/206 xfs/216 xfs/234 xfs/250 xfs/289
> xfs/558 xfs/559
> Failed 16 of 930 tests
>
> * generic/645 fails because it requires an unrelated fix to fstests
> because we changed idmapped mounts to not not allow empty idmappings.
> * generic/689 fails because the providec config doesn't compile tmpfs with POSIX ACL support
> * xfs/558 and xfs/559 complain about missing logging
> about iomap validation and are unrelated
> * All other failures are caused by loop devices which is expected unil
> a util-linux is released that contains Jan's fix in [1] so that
> mount(8) doesn't hold a writable fd to the loop device anymore and
> instead simply uses a read-only one.
>
> [1]: https://github.com/util-linux/util-linux/commit/1cde32f323e0970f6c7f35940dcc0aea97b821e5
> [2]: https://lore.kernel.org/r/Zf18I2UOGQxeN-Z1@xxxxxxxxxxxxxxxxxxxx
> [3]:
> #! /bin/bash
>
> set -x
>
> cd ~/src/git/xfstests-dev/
> FIRST_DEV=/dev/vda3
> SECOND_DEV=/dev/vda4
> THIRD_DEV=/dev/vda5
>
> echo "Testing xfs"
> cat <<EOF >local.config
> FSTYP=xfs
> export TEST_DEV=${FIRST_DEV}
> export SCRATCH_DEV=${SECOND_DEV}
> export LOGWRITE_DEV=${THIRD_DEV}
> export TEST_DIR=/mnt/test
> export SCRATCH_MNT=/mnt/scratch
> EOF
>
> sudo mkfs.xfs -f ${FIRST_DEV}
> sudo mkfs.xfs -f ${SECOND_DEV}
> sudo mkfs.xfs -f ${THIRD_DEV}
> sudo ./check -g quick
