On 2/12/24 00:47, Damien Le Moal wrote:
Replying to myself as I had an idea: 1) Store the zone capacity in a separate array: 4B * nr_zones needed. Storing "0" as a value for a zone in that array would indicate that the zone is conventional. No additional zone bitmap needed. 2) Use a sparse xarray for managing allocated zone write plugs: 64B per allocated zone write plug needed, which for an SMR drive would generally be at most 128 * 64B = 8K. So for an SMR drive with 100,000 zones, that would be a total of 408 KB, instead of the current 1.6 MB. Will try to prototype this to see how performance goes (I am worried about the xarray lookup overhead in the hot path).
Hi Damien, Are there any zoned devices where the sequential write required zones occur before the conventional zones? If not, does this mean that the conventional zones always occur before the write pointer zones and also that storing the number of conventional zones is sufficient? Are there zoned storage devices where each zone has a different capacity? I have not yet encountered any such device. I'm wondering whether a single capacity variable would be sufficient for the entire device. Thank you, Bart.
