On 2/12/24 14:45, Christoph Hellwig wrote:
Add a new queue_limits_{start,commit}_update pair of functions that
allows taking an atomic snapshot of queue limits, update it, and
commit it if it passes validity checking. Also use the low-level
validation helper to implement blk_set_default_limits instead of
duplicating the initialization.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
block/blk-core.c | 1 +
block/blk-settings.c | 228 ++++++++++++++++++++++++++++++++++-------
block/blk.h | 4 +-
include/linux/blkdev.h | 23 +++++
4 files changed, 218 insertions(+), 38 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 2b11d8325fde68..cb56724a8dfb25 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -425,6 +425,7 @@ struct request_queue *blk_alloc_queue(int node_id)
mutex_init(&q->debugfs_mutex);
mutex_init(&q->sysfs_lock);
mutex_init(&q->sysfs_dir_lock);
+ mutex_init(&q->limits_lock);
mutex_init(&q->rq_qos_mutex);
spin_lock_init(&q->queue_lock);
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 1cae2db41490d2..27b9b4a2a85395 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -25,42 +25,6 @@ void blk_queue_rq_timeout(struct request_queue *q, unsigned int timeout)
}
EXPORT_SYMBOL_GPL(blk_queue_rq_timeout);
-/**
- * blk_set_default_limits - reset limits to default values
- * @lim: the queue_limits structure to reset
- *
- * Description:
- * Returns a queue_limit struct to its default state.
- */
-void blk_set_default_limits(struct queue_limits *lim)
-{
- lim->max_segments = BLK_MAX_SEGMENTS;
- lim->max_discard_segments = 1;
- lim->max_integrity_segments = 0;
- lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
- lim->virt_boundary_mask = 0;
- lim->max_segment_size = BLK_MAX_SEGMENT_SIZE;
- lim->max_sectors = lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS;
- lim->max_user_sectors = lim->max_dev_sectors = 0;
- lim->chunk_sectors = 0;
- lim->max_write_zeroes_sectors = 0;
- lim->max_zone_append_sectors = 0;
- lim->max_discard_sectors = 0;
- lim->max_hw_discard_sectors = 0;
- lim->max_secure_erase_sectors = 0;
- lim->discard_granularity = 512;
- lim->discard_alignment = 0;
- lim->discard_misaligned = 0;
- lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
- lim->bounce = BLK_BOUNCE_NONE;
- lim->alignment_offset = 0;
- lim->io_opt = 0;
- lim->misaligned = 0;
- lim->zoned = false;
- lim->zone_write_granularity = 0;
- lim->dma_alignment = 511;
-}
-
/**
* blk_set_stacking_limits - set default limits for stacking devices
* @lim: the queue_limits structure to reset
@@ -99,6 +63,198 @@ static void blk_apply_bdi_limits(struct backing_dev_info *bdi,
bdi->io_pages = lim->max_sectors >> PAGE_SECTORS_SHIFT;
}
+static int blk_validate_zoned_limits(struct queue_limits *lim)
+{
+ if (!lim->zoned) {
+ if (WARN_ON_ONCE(lim->max_open_zones) ||
+ WARN_ON_ONCE(lim->max_active_zones) ||
+ WARN_ON_ONCE(lim->zone_write_granularity) ||
+ WARN_ON_ONCE(lim->max_zone_append_sectors))
+ return -EINVAL;
+ return 0;
+ }
+
+ if (WARN_ON_ONCE(!IS_ENABLED(CONFIG_BLK_DEV_ZONED)))
+ return -EINVAL;
+
+ if (lim->zone_write_granularity < lim->logical_block_size)
+ lim->zone_write_granularity = lim->logical_block_size;
+
+ if (lim->max_zone_append_sectors) {
+ /*
+ * The Zone Append size is limited by the maximum I/O size
+ * and the zone size given that it can't span zones.
+ */
+ lim->max_zone_append_sectors =
+ min3(lim->max_hw_sectors,
+ lim->max_zone_append_sectors,
+ lim->chunk_sectors);
+ }
+
+ return 0;
+}
+
+/*
+ * Check that the limits in lim are valid, initialize defaults for unset
+ * values, and cap values based on others where needed.
+ */
+static int blk_validate_limits(struct queue_limits *lim)
+{
+ unsigned int max_hw_sectors;
+
+ /*
+ * Unless otherwise specified, default to 512 byte logical blocks and a
+ * physical block size equal to the logical block size.
+ */
+ if (!lim->logical_block_size)
+ lim->logical_block_size = SECTOR_SIZE;
+ if (lim->physical_block_size < lim->logical_block_size)
+ lim->physical_block_size = lim->logical_block_size;
+
+ /*
+ * The minimum I/O size defaults to the physical block size unless
+ * explicitly overridden.
+ */
+ if (lim->io_min < lim->physical_block_size)
+ lim->io_min = lim->physical_block_size;
+
+ /*
+ * max_hw_sectors has a somewhat weird default for historical reason,
+ * but driver really should set their own instead of relying on this
+ * value.
+ *
+ * The block layer relies on the fact that every driver can
+ * handle at lest a page worth of data per I/O, and needs the value
+ * aligned to the logical block size.
+ */
+ if (!lim->max_hw_sectors)
+ lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS;
+ if (WARN_ON_ONCE(lim->max_hw_sectors < PAGE_SECTORS))
+ return -EINVAL;
+ lim->max_hw_sectors = round_down(lim->max_hw_sectors,
+ lim->logical_block_size >> SECTOR_SHIFT);
+
+ /*
+ * The actual max_sectors value is a complex beast and also takes the
+ * max_dev_sectors value (set by SCSI ULPs) and a user configurable
+ * value into account. The ->max_sectors value is always calculated
+ * from these, so directly setting it won't have any effect.
+ */
+ max_hw_sectors = min_not_zero(lim->max_hw_sectors,
+ lim->max_dev_sectors);
+ if (lim->max_user_sectors) {
+ if (lim->max_user_sectors > max_hw_sectors ||
+ lim->max_user_sectors < PAGE_SIZE / SECTOR_SIZE)
+ return -EINVAL;
+ lim->max_sectors = min(max_hw_sectors, lim->max_user_sectors);
+ } else {
+ lim->max_sectors = min(max_hw_sectors, BLK_DEF_MAX_SECTORS_CAP);
+ }
+ lim->max_sectors = round_down(lim->max_sectors,
+ lim->logical_block_size >> SECTOR_SHIFT);
+
+ /*
+ * Random default for the maximum number of sectors. Driver should not
+ * rely on this and set their own.
+ */
+ if (!lim->max_segments)
+ lim->max_segments = BLK_MAX_SEGMENTS;
+
+ lim->max_discard_sectors = lim->max_hw_discard_sectors;
+ if (!lim->max_discard_segments)
+ lim->max_discard_segments = 1;
+
+ if (lim->discard_granularity < lim->physical_block_size)
+ lim->discard_granularity = lim->physical_block_size;
+
+ /*
+ * By default there is no limit on the segment boundary alignment,
+ * but if there is one it can't be smaller than the page size as
+ * that would break all the normal I/O patterns.
+ */
+ if (!lim->seg_boundary_mask)
+ lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
+ if (WARN_ON_ONCE(lim->seg_boundary_mask < PAGE_SIZE - 1))
+ return -EINVAL;
+
+ /*
+ * The maximum segment size has an odd historic 64k default that
+ * drivers probably should override. Just like the I/O size we
+ * require drivers to at least handle a full page per segment.
+ */
+ if (!lim->max_segment_size)
+ lim->max_segment_size = BLK_MAX_SEGMENT_SIZE;
+ if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
+ return -EINVAL;
+
+ /*
+ * Devices that require a virtual boundary do not support scatter/gather
+ * I/O natively, but instead require a descriptor list entry for each
+ * page (which might not be identical to the Linux PAGE_SIZE). Because
+ * of that they are not limited by our notion of "segment size".
+ */
+ if (lim->virt_boundary_mask) {
+ if (WARN_ON_ONCE(lim->max_segment_size &&
+ lim->max_segment_size != UINT_MAX))
+ return -EINVAL;
+ lim->max_segment_size = UINT_MAX;
+ }
+
+ /*
+ * We require drivers to at least do logical block aligned I/O, but
+ * historically could not check for that due to the separate calls
+ * to set the limits. Once the transition is finished the check
+ * below should be narrowed down to check the logical block size.
+ */
+ if (!lim->dma_alignment)
+ lim->dma_alignment = SECTOR_SIZE - 1;
+ if (WARN_ON_ONCE(lim->dma_alignment > PAGE_SIZE))
+ return -EINVAL;
+
+ if (lim->alignment_offset) {
+ lim->alignment_offset &= (lim->physical_block_size - 1);
+ lim->misaligned = 0;
+ }
+
+ return blk_validate_zoned_limits(lim);
+}
+
+/*
+ * Set the default limits for a newly allocated queue. @lim contains the
+ * initial limits set by the driver, which could be no limit in which case
+ * all fields are cleared to zero.
+ */
+int blk_set_default_limits(struct queue_limits *lim)
+{
+ return blk_validate_limits(lim);
+}
+
+/**
+ * queue_limits_commit_update - commit an atomic update of queue limits
+ * @q: queue to update
+ * @lim: limits to apply
+ *
+ * Apply the limits in @lim that were obtained from queue_limits_start_update()
+ * and updated by the caller to @q.
+ *
+ * Returns 0 if successful, else a negative error code.
+ */
+int queue_limits_commit_update(struct request_queue *q,
+ struct queue_limits *lim)
+ __releases(q->limits_lock)
+{
+ int error = blk_validate_limits(lim);
+
+ if (!error) {
+ q->limits = *lim;
+ if (q->disk)
+ blk_apply_bdi_limits(q->disk->bdi, lim);
+ }
+ mutex_unlock(&q->limits_lock);
+ return error;
+}
+EXPORT_SYMBOL_GPL(queue_limits_commit_update);
+
/**
* blk_queue_bounce_limit - set bounce buffer limit for queue
* @q: the request queue for the device
diff --git a/block/blk.h b/block/blk.h
index 913c93838a01bf..7c30e2ac8ebcd3 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -330,7 +330,7 @@ void blk_rq_set_mixed_merge(struct request *rq);
bool blk_rq_merge_ok(struct request *rq, struct bio *bio);
enum elv_merge blk_try_merge(struct request *rq, struct bio *bio);
-void blk_set_default_limits(struct queue_limits *lim);
+int blk_set_default_limits(struct queue_limits *lim);
int blk_dev_init(void);
/*
@@ -448,7 +448,7 @@ static inline void bio_release_page(struct bio *bio, struct page *page)
unpin_user_page(page);
}
-struct request_queue *blk_alloc_queue(int node_id);
+struct request_queue *blk_alloc_queue(struct queue_limits *lim, int node_id);
What is that doing here?
If you change the calling convention, shouldn't you modify the callers, too?
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@xxxxxxx +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Ivo Totev, Andrew McDonald,
Werner Knoblich
