Re: [PATCH] block: fix deadlock between bd_link_disk_holder and partition scan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 8, 2024 at 12:44 AM Li Nan <linan666@xxxxxxxxxxxxxxx> wrote:
>
>
>
> 在 2024/2/8 14:50, Song Liu 写道:
> > On Wed, Feb 7, 2024 at 1:32 AM <linan666@xxxxxxxxxxxxxxx> wrote:
> >>
> >> From: Li Nan <linan122@xxxxxxxxxx>
> >>
> >> 'open_mutex' of gendisk is used to protect open/close block devices. But
> >> in bd_link_disk_holder(), it is used to protect the creation of symlink
> >> between holding disk and slave bdev, which introduces some issues.
> >>
> >> When bd_link_disk_holder() is called, the driver is usually in the process
> >> of initialization/modification and may suspend submitting io. At this
> >> time, any io hold 'open_mutex', such as scanning partitions, can cause
> >> deadlocks. For example, in raid:
> >>
> >> T1                              T2
> >> bdev_open_by_dev
> >>   lock open_mutex [1]
> >>   ...
> >>    efi_partition
> >>    ...
> >>     md_submit_bio
> >>                                  md_ioctl mddev_syspend
> >>                                    -> suspend all io
> >>                                   md_add_new_disk
> >>                                    bind_rdev_to_array
> >>                                     bd_link_disk_holder
> >>                                      try lock open_mutex [2]
> >>      md_handle_request
> >>       -> wait mddev_resume
> >>
> >> T1 scan partition, T2 add a new device to raid. T1 waits for T2 to resume
> >> mddev, but T2 waits for open_mutex held by T1. Deadlock occurs.
> >>
> >> Fix it by introducing a local mutex 'holder_mutex' to replace 'open_mutex'.
> >
> > Is this to fix [1]? Do we need some Fixes and/or Closes tags?
> >
>
> No. Just use another way to fix [2], and both [2] and this patch can fix
> the issue. I am not sure about the root cause of [1] yet.
>
> [2] https://patchwork.kernel.org/project/linux-raid/list/?series=812045
>
> > Could you please add steps to reproduce this issue?
>
> We need to modify the kernel, add sleep in md_submit_bio() and md_ioctl()
> as below, and then:
>    1. mdadm -CR /dev/md0 -l1 -n2 /dev/sd[bc]  #create a raid
>    2. echo 1 > /sys/module/md_mod/parameters/error_inject  #enable sleep
>    3. 'mdadm --add /dev/md0 /dev/sda'  #add a disk to raid
>    4. submit ioctl BLKRRPART to raid within 10s.

The analysis makes sense. I also hit the issue a couple times without adding
extra delays. But I am not sure whether this is the best fix (I didn't find real
issues with it either).

Maybe we don't need to suspend the array for ADD_NEW_DISK? So that
something like the following might just work?

Thanks,
Song

@@ -7573,7 +7577,6 @@ static inline bool md_ioctl_valid(unsigned int cmd)
 static bool md_ioctl_need_suspend(unsigned int cmd)
 {
        switch (cmd) {
-       case ADD_NEW_DISK:
        case HOT_ADD_DISK:
        case HOT_REMOVE_DISK:
        case SET_BITMAP_FILE:





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux