Re: [PATCHv5 1/1] block: introduce content activity based ioprio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 30, 2024 at 9:17 PM Damien Le Moal <dlemoal@xxxxxxxxxx> wrote:
>
> On 1/30/24 21:43, Zhaoyang Huang wrote:
> > On Tue, Jan 30, 2024 at 5:17 PM Damien Le Moal <dlemoal@xxxxxxxxxx> wrote:
> >>
> >> On 1/30/24 17:42, zhaoyang.huang wrote:
> >>> From: Zhaoyang Huang <zhaoyang.huang@xxxxxxxxxx>
> >>>
> >>> Currently, request's ioprio are set via task's schedule priority(when no
> >>> blkcg configured), which has high priority tasks possess the privilege on
> >>> both of CPU and IO scheduling.
> >>> This commit works as a hint of original policy by promoting the request ioprio
> >>> based on the page/folio's activity. The original idea comes from LRU_GEN
> >>> which provides more precised folio activity than before. This commit try
> >>> to adjust the request's ioprio when certain part of its folios are hot,
> >>> which indicate that this request carry important contents and need be
> >>> scheduled ealier.
> >>>
> >>> This commit is verified on a v6.6 6GB RAM android14 system via 4 test cases
> >>> by changing the bio_add_page/folio API in erofs, ext4 and f2fs in
> >>> another commit.
> >>>
> >>> Case 1:
> >>> script[a] which get significant improved fault time as expected[b]
> >>> where dd's cost also shrink from 55s to 40s.
> >>> (1). fault_latency.bin is an ebpf based test tool which measure all task's
> >>>    iowait latency during page fault when scheduled out/in.
> >>> (2). costmem generate page fault by mmaping a file and access the VA.
> >>> (3). dd generate concurrent vfs io.
> >>>
> >>> [a]
> >>> ./fault_latency.bin 1 5 > /data/dd_costmem &
> >>> costmem -c0 -a2048000 -b128000 -o0 1>/dev/null &
> >>> costmem -c0 -a2048000 -b128000 -o0 1>/dev/null &
> >>> costmem -c0 -a2048000 -b128000 -o0 1>/dev/null &
> >>> costmem -c0 -a2048000 -b128000 -o0 1>/dev/null &
> >>> dd if=/dev/block/sda of=/data/ddtest bs=1024 count=2048000 &
> >>> dd if=/dev/block/sda of=/data/ddtest1 bs=1024 count=2048000 &
> >>> dd if=/dev/block/sda of=/data/ddtest2 bs=1024 count=2048000 &
> >>> dd if=/dev/block/sda of=/data/ddtest3 bs=1024 count=2048000
> >>> [b]
> >>>                        mainline               commit
> >>> io wait                836us            156us
> >>>
> >>> Case 2:
> >>> fio -filename=/dev/block/by-name/userdata -rw=randread -direct=0 -bs=4k -size=2000M -numjobs=8 -group_reporting -name=mytest
> >>> mainline: 513MiB/s
> >>> READ: bw=531MiB/s (557MB/s), 531MiB/s-531MiB/s (557MB/s-557MB/s), io=15.6GiB (16.8GB), run=30137-30137msec
> >>> READ: bw=543MiB/s (569MB/s), 543MiB/s-543MiB/s (569MB/s-569MB/s), io=15.6GiB (16.8GB), run=29469-29469msec
> >>> READ: bw=474MiB/s (497MB/s), 474MiB/s-474MiB/s (497MB/s-497MB/s), io=15.6GiB (16.8GB), run=33724-33724msec
> >>> READ: bw=535MiB/s (561MB/s), 535MiB/s-535MiB/s (561MB/s-561MB/s), io=15.6GiB (16.8GB), run=29928-29928msec
> >>> READ: bw=523MiB/s (548MB/s), 523MiB/s-523MiB/s (548MB/s-548MB/s), io=15.6GiB (16.8GB), run=30617-30617msec
> >>> READ: bw=492MiB/s (516MB/s), 492MiB/s-492MiB/s (516MB/s-516MB/s), io=15.6GiB (16.8GB), run=32518-32518msec
> >>> READ: bw=533MiB/s (559MB/s), 533MiB/s-533MiB/s (559MB/s-559MB/s), io=15.6GiB (16.8GB), run=29993-29993msec
> >>> READ: bw=524MiB/s (550MB/s), 524MiB/s-524MiB/s (550MB/s-550MB/s), io=15.6GiB (16.8GB), run=30526-30526msec
> >>> READ: bw=529MiB/s (554MB/s), 529MiB/s-529MiB/s (554MB/s-554MB/s), io=15.6GiB (16.8GB), run=30269-30269msec
> >>> READ: bw=449MiB/s (471MB/s), 449MiB/s-449MiB/s (471MB/s-471MB/s), io=15.6GiB (16.8GB), run=35629-35629msec
> >>>
> >>> commit: 633MiB/s
> >>> READ: bw=668MiB/s (700MB/s), 668MiB/s-668MiB/s (700MB/s-700MB/s), io=15.6GiB (16.8GB), run=23952-23952msec
> >>> READ: bw=589MiB/s (618MB/s), 589MiB/s-589MiB/s (618MB/s-618MB/s), io=15.6GiB (16.8GB), run=27164-27164msec
> >>> READ: bw=638MiB/s (669MB/s), 638MiB/s-638MiB/s (669MB/s-669MB/s), io=15.6GiB (16.8GB), run=25071-25071msec
> >>> READ: bw=714MiB/s (749MB/s), 714MiB/s-714MiB/s (749MB/s-749MB/s), io=15.6GiB (16.8GB), run=22409-22409msec
> >>> READ: bw=600MiB/s (629MB/s), 600MiB/s-600MiB/s (629MB/s-629MB/s), io=15.6GiB (16.8GB), run=26669-26669msec
> >>> READ: bw=592MiB/s (621MB/s), 592MiB/s-592MiB/s (621MB/s-621MB/s), io=15.6GiB (16.8GB), run=27036-27036msec
> >>> READ: bw=691MiB/s (725MB/s), 691MiB/s-691MiB/s (725MB/s-725MB/s), io=15.6GiB (16.8GB), run=23150-23150msec
> >>> READ: bw=569MiB/s (596MB/s), 569MiB/s-569MiB/s (596MB/s-596MB/s), io=15.6GiB (16.8GB), run=28142-28142msec
> >>> READ: bw=563MiB/s (590MB/s), 563MiB/s-563MiB/s (590MB/s-590MB/s), io=15.6GiB (16.8GB), run=28429-28429msec
> >>> READ: bw=712MiB/s (746MB/s), 712MiB/s-712MiB/s (746MB/s-746MB/s), io=15.6GiB (16.8GB), run=22478-22478msec
> >>>
> >>> Case 3:
> >>> This commit is also verified by the case of launching camera APP which is
> >>> usually considered as heavy working load on both of memory and IO, which
> >>> shows 12%-24% improvement.
> >>>
> >>>               ttl = 0         ttl = 50        ttl = 100
> >>> mainline        2267ms                2420ms          2316ms
> >>> commit          1992ms          1806ms          1998ms
> >>>
> >>> case 4:
> >>> androbench has no improvment as well as regression which supposed to be
> >>> its test time is short which MGLRU hasn't take effect yet.
> >>>
> >>> Signed-off-by: Zhaoyang Huang <zhaoyang.huang@xxxxxxxxxx>
> >>> ---
> >>> change of v2: calculate page's activity via helper function
> >>> change of v3: solve layer violation by move API into mm
> >>> change of v4: keep block clean by removing the page related API
> >>> change of v5: introduce the macros of bio_add_folio/page for read dir.
> >>> ---
> >>> ---
> >>>  include/linux/act_ioprio.h  | 60 +++++++++++++++++++++++++++++++++++++
> >>>  include/uapi/linux/ioprio.h | 38 +++++++++++++++++++++++
> >>>  mm/Kconfig                  |  8 +++++
> >>>  3 files changed, 106 insertions(+)
> >>>  create mode 100644 include/linux/act_ioprio.h
> >>>
> >>> diff --git a/include/linux/act_ioprio.h b/include/linux/act_ioprio.h
> >>> new file mode 100644
> >>> index 000000000000..ca7309b85758
> >>> --- /dev/null
> >>> +++ b/include/linux/act_ioprio.h
> >>> @@ -0,0 +1,60 @@
> >>> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> >>> +#ifndef _ACT_IOPRIO_H
> >>> +#define _ACT_IOPRIO_H
> >>> +
> >>> +#ifdef CONFIG_CONTENT_ACT_BASED_IOPRIO
> >>> +#include <linux/bio.h>
> >>> +
> >>> +static __maybe_unused
> >>> +bool act_bio_add_folio(struct bio *bio, struct folio *folio, size_t len,
> >>> +             size_t off)
> >>> +{
> >>> +     int class, level, hint, activity;
> >>> +     bool ret;
> >>> +
> >>> +     ret = bio_add_folio(bio, folio, len, off);
> >>> +     if (bio_op(bio) == REQ_OP_READ && ret) {
> >>> +             class = IOPRIO_PRIO_CLASS(bio->bi_ioprio);
> >>> +             level = IOPRIO_PRIO_LEVEL(bio->bi_ioprio);
> >>> +             hint = IOPRIO_PRIO_HINT(bio->bi_ioprio);
> >>> +             activity = IOPRIO_PRIO_ACTIVITY(bio->bi_ioprio);
> >>> +             activity += (activity < IOPRIO_NR_ACTIVITY &&
> >>> +                             folio_test_workingset(folio)) ? 1 : 0;
> >>> +             if (activity >= bio->bi_vcnt / 2)
> >>> +                     class = IOPRIO_CLASS_RT;
> >>> +             else if (activity >= bio->bi_vcnt / 4)
> >>> +                     class = max(IOPRIO_PRIO_CLASS(get_current_ioprio()), IOPRIO_CLASS_BE);
> >>> +             activity = min(IOPRIO_NR_ACTIVITY - 1, activity);
> >>> +             bio->bi_ioprio = IOPRIO_PRIO_VALUE_ACTIVITY(class, level, hint, activity);
> >>> +     }
> >>> +     return ret;
> >>> +}
> >>
> >> Big non-inline functions in a header file... That is unusual, to say the least.
> >> So every FS that includes this will get its own copy of the binary for these
> >> functions. That is not exactly optimal.
> > Thanks for quick reply:D
> > This is a trade-off method for having both the block layer and fs be
> > clean and do no modification. There is less calling bio_add_xxx within
> > fs actually.
> >>
> >>> +
> >>> +static __maybe_unused
> >>> +int act_bio_add_page(struct bio *bio, struct page *page,
> >>> +             unsigned int len, unsigned int offset)
> >>> +{
> >>> +     int class, level, hint, activity;
> >>> +     int ret = 0;
> >>> +
> >>> +     ret = bio_add_page(bio, page, len, offset);
> >>> +     if (bio_op(bio) == REQ_OP_READ && ret > 0) {
> >>> +             class = IOPRIO_PRIO_CLASS(bio->bi_ioprio);
> >>> +             level = IOPRIO_PRIO_LEVEL(bio->bi_ioprio);
> >>> +             hint = IOPRIO_PRIO_HINT(bio->bi_ioprio);
> >>> +             activity = IOPRIO_PRIO_ACTIVITY(bio->bi_ioprio);
> >>> +             activity += (activity < IOPRIO_NR_ACTIVITY &&
> >>> +                             PageWorkingset(page)) ? 1 : 0;
> >>> +             if (activity >= bio->bi_vcnt / 2)
> >>> +                     class = IOPRIO_CLASS_RT;
> >>> +             else if (activity >= bio->bi_vcnt / 4)
> >>> +                     class = max(IOPRIO_PRIO_CLASS(get_current_ioprio()), IOPRIO_CLASS_BE);
> >>> +             activity = min(IOPRIO_NR_ACTIVITY - 1, activity);
> >>> +             bio->bi_ioprio = IOPRIO_PRIO_VALUE_ACTIVITY(class, level, hint, activity);
> >>> +     }
> >>> +     return ret;
> >>> +}
> >>> +#define bio_add_folio(bio, folio, len, off)     act_bio_add_folio(bio, folio, len, off)
> >>> +#define bio_add_page(bio, page, len, offset)    act_bio_add_page(bio, page, len, offset)
> >>
> >> These functions are *NOT* part of the block layer. So please do not pretend they
> >> are. Why don't you simply write a function equivalent to what you have inside
> >> the "if" above and have the FS call that after bio_add_Page() ?
> > The iteration of bio is costly(could be maximum to 256 pages) and
> > needs fs's code modification. I will implement a version as you
> > suggested.
> >>
> >> And I seriously doubt that all compilers will be happy with these macro names
> >> clashing with real function names...
> >>
> >>> +#endif
> >>> +#endif
> >>> diff --git a/include/uapi/linux/ioprio.h b/include/uapi/linux/ioprio.h
> >>> index bee2bdb0eedb..64cf5ff0ac5f 100644
> >>> --- a/include/uapi/linux/ioprio.h
> >>> +++ b/include/uapi/linux/ioprio.h
> >>> @@ -71,12 +71,24 @@ enum {
> >>>   * class and level.
> >>>   */
> >>>  #define IOPRIO_HINT_SHIFT            IOPRIO_LEVEL_NR_BITS
> >>> +#ifdef CONFIG_CONTENT_ACT_BASED_IOPRIO
> >>> +#define IOPRIO_HINT_NR_BITS          3
> >>> +#else
> >>>  #define IOPRIO_HINT_NR_BITS          10
> >>> +#endif
> >>>  #define IOPRIO_NR_HINTS                      (1 << IOPRIO_HINT_NR_BITS)
> >>>  #define IOPRIO_HINT_MASK             (IOPRIO_NR_HINTS - 1)
> >>>  #define IOPRIO_PRIO_HINT(ioprio)     \
> >>>       (((ioprio) >> IOPRIO_HINT_SHIFT) & IOPRIO_HINT_MASK)
> >>>
> >>> +#ifdef CONFIG_CONTENT_ACT_BASED_IOPRIO
> >>> +#define IOPRIO_ACTIVITY_SHIFT                (IOPRIO_HINT_NR_BITS + IOPRIO_LEVEL_NR_BITS)
> >>> +#define IOPRIO_ACTIVITY_NR_BITS              7
> >>
> >> I already told you that taking all the free hint bits for yourself, leaving no
> >> room fo future IO hints, is not nice. Do you really need 7 bits for your thing ?
> >> Why does the activity even need to be part of the IO priority ? From the rather
> >> short explanation in the commit message, it seems that activity should simply
> >> raise the priority (either class or level or both). I do not see why that
> >> activity number needs to be in the ioprio. Who in the kernel will look at it ?
> >> IO scheduler ? the storage device ?
> > As I explained above, 7 bits(128 of 256) within ioprio is the minimum
> > number for counting active pages carried by this bio and will end at
> > the IO scheduler. bio has to be enlarged a new member to log these if
> > we don't use ioprio.
>
> That information does not belong to the ioprio. And which scheduler acts on a
> number of pages anyway ? The scheduler sees requests and BIOs. It can determine
> the number of pages they have if that is an information it needs to make
> scheduling decisison. Using ioprio to pass that information down is a dirty hack.
No. IO scheduler acts on IOPRIO_CLASS which is transferred from the
page's activity by the current method. I will implement another
version of iterating pages before submit_bio and feed back to the list
>
> >>
> >>> +#define IOPRIO_NR_ACTIVITY           (1 << IOPRIO_ACTIVITY_NR_BITS)
> >>> +#define IOPRIO_ACTIVITY_MASK         (IOPRIO_NR_ACTIVITY - 1)
> >>> +#define IOPRIO_PRIO_ACTIVITY(ioprio) \
> >>> +     (((ioprio) >> IOPRIO_ACTIVITY_SHIFT) & IOPRIO_ACTIVITY_MASK)
> >>> +#endif
> >>>  /*
> >>>   * I/O hints.
> >>>   */
> >>> @@ -104,6 +116,7 @@ enum {
> >>>
> >>>  #define IOPRIO_BAD_VALUE(val, max) ((val) < 0 || (val) >= (max))
> >>>
> >>> +#ifndef CONFIG_CONTENT_ACT_BASED_IOPRIO
> >>>  /*
> >>>   * Return an I/O priority value based on a class, a level and a hint.
> >>>   */
> >>> @@ -123,5 +136,30 @@ static __always_inline __u16 ioprio_value(int prioclass, int priolevel,
> >>>       ioprio_value(prioclass, priolevel, IOPRIO_HINT_NONE)
> >>>  #define IOPRIO_PRIO_VALUE_HINT(prioclass, priolevel, priohint)       \
> >>>       ioprio_value(prioclass, priolevel, priohint)
> >>> +#else
> >>> +/*
> >>> + * Return an I/O priority value based on a class, a level, a hint and
> >>> + * content's activities
> >>> + */
> >>> +static __always_inline __u16 ioprio_value(int prioclass, int priolevel,
> >>> +             int priohint, int activity)
> >>> +{
> >>> +     if (IOPRIO_BAD_VALUE(prioclass, IOPRIO_NR_CLASSES) ||
> >>> +                     IOPRIO_BAD_VALUE(priolevel, IOPRIO_NR_LEVELS) ||
> >>> +                     IOPRIO_BAD_VALUE(priohint, IOPRIO_NR_HINTS) ||
> >>> +                     IOPRIO_BAD_VALUE(activity, IOPRIO_NR_ACTIVITY))
> >>> +             return IOPRIO_CLASS_INVALID << IOPRIO_CLASS_SHIFT;
> >>>
> >>> +     return (prioclass << IOPRIO_CLASS_SHIFT) |
> >>> +             (activity << IOPRIO_ACTIVITY_SHIFT) |
> >>> +             (priohint << IOPRIO_HINT_SHIFT) | priolevel;
> >>> +}
> >>> +
> >>> +#define IOPRIO_PRIO_VALUE(prioclass, priolevel)                      \
> >>> +     ioprio_value(prioclass, priolevel, IOPRIO_HINT_NONE, 0)
> >>> +#define IOPRIO_PRIO_VALUE_HINT(prioclass, priolevel, priohint)       \
> >>> +     ioprio_value(prioclass, priolevel, priohint, 0)
> >>> +#define IOPRIO_PRIO_VALUE_ACTIVITY(prioclass, priolevel, priohint, activity) \
> >>> +     ioprio_value(prioclass, priolevel, priohint, activity)
> >>> +#endif
> >>>  #endif /* _UAPI_LINUX_IOPRIO_H */
> >>> diff --git a/mm/Kconfig b/mm/Kconfig
> >>> index 264a2df5ecf5..e0e5a5a44ded 100644
> >>> --- a/mm/Kconfig
> >>> +++ b/mm/Kconfig
> >>> @@ -1240,6 +1240,14 @@ config LRU_GEN_STATS
> >>>         from evicted generations for debugging purpose.
> >>>
> >>>         This option has a per-memcg and per-node memory overhead.
> >>> +
> >>> +config CONTENT_ACT_BASED_IOPRIO
> >>> +     bool "Enable content activity based ioprio"
> >>> +     depends on LRU_GEN
> >>> +     default n
> >>> +     help
> >>> +       This item enable the feature of adjust bio's priority by
> >>> +       calculating its content's activity.
> >>>  # }
> >>>
> >>>  config ARCH_SUPPORTS_PER_VMA_LOCK
> >>
> >> --
> >> Damien Le Moal
> >> Western Digital Research
> >>
>
> --
> Damien Le Moal
> Western Digital Research
>





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux