From: Ming Lei <ming.lei@xxxxxxxxxx>
[ Upstream commit 5266caaf5660529e3da53004b8b7174cab6374ed ]
In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered
with the following blk_mq_get_driver_tag() in case of getting driver
tag failure.
Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe
the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime
blk_mq_mark_tag_wait() can't get driver tag successfully.
This issue can be reproduced by running the following test in loop, and
fio hang can be observed in < 30min when running it on my test VM
in laptop.
modprobe -r scsi_debug
modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4
dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename`
fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \
--runtime=100 --numjobs=40 --time_based --name=test \
--ioengine=libaio
Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which
is just fine in case of running out of tag.
Cc: Jan Kara <jack@xxxxxxx>
Cc: Kemeng Shi <shikemeng@xxxxxxxxxxxxxxx>
Reported-by: Changhui Zhong <czhong@xxxxxxxxxx>
Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20240112122626.4181044-1-ming.lei@xxxxxxxxxx
Signed-off-by: Jens Axboe <axboe@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
block/blk-mq.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 368f1947c895..ebfefbcb3604 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1859,6 +1859,22 @@ static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx *hctx,
wait->flags &= ~WQ_FLAG_EXCLUSIVE;
__add_wait_queue(wq, wait);
+ /*
+ * Add one explicit barrier since blk_mq_get_driver_tag() may
+ * not imply barrier in case of failure.
+ *
+ * Order adding us to wait queue and allocating driver tag.
+ *
+ * The pair is the one implied in sbitmap_queue_wake_up() which
+ * orders clearing sbitmap tag bits and waitqueue_active() in
+ * __sbitmap_queue_wake_up(), since waitqueue_active() is lockless
+ *
+ * Otherwise, re-order of adding wait queue and getting driver tag
+ * may cause __sbitmap_queue_wake_up() to wake up nothing because
+ * the waitqueue_active() may not observe us in wait queue.
+ */
+ smp_mb();
+
/*
* It's possible that a tag was freed in the window between the
* allocation failure and adding the hardware queue to the wait
--
2.43.0
