[PATCH v2 2/9] mmc: moxart-mmc: Factor out moxart_use_dma() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The same code is in two places and we will add a third place.
Break this out into its own function.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 drivers/mmc/host/moxart-mmc.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index 5cfdd3a86e54..d12d7d79b19c 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -254,6 +254,11 @@ static void moxart_dma_complete(void *param)
 	complete(&host->dma_complete);
 }
 
+static bool moxart_use_dma(struct moxart_host *host)
+{
+	return (host->data_len > host->fifo_width) && host->have_dma;
+}
+
 static void moxart_transfer_dma(struct mmc_data *data, struct moxart_host *host)
 {
 	u32 len, dir_slave;
@@ -375,7 +380,7 @@ static void moxart_prepare_data(struct moxart_host *host)
 	if (data->flags & MMC_DATA_WRITE)
 		datactrl |= DCR_DATA_WRITE;
 
-	if ((host->data_len > host->fifo_width) && host->have_dma)
+	if (moxart_use_dma(host))
 		datactrl |= DCR_DMA_EN;
 
 	writel(DCR_DATA_FIFO_RESET, host->base + REG_DATA_CONTROL);
@@ -407,7 +412,7 @@ static void moxart_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	moxart_send_command(host, host->mrq->cmd);
 
 	if (mrq->cmd->data) {
-		if ((host->data_len > host->fifo_width) && host->have_dma) {
+		if (moxart_use_dma(host)) {
 
 			writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK);
 

-- 
2.34.1





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux