[PATCH blktests v3 2/2] block/031: allow to run with built-in null_blk driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The test case block/031 sets the null_blk parameter shared_tag_bitmap=1
for testing. The parameter has been set as a module parameter, so the
null_blk driver must be loadable. However, null_blk allows you to set
shared_tag_bitmap as a configfs parameter since the kernel commit
7012eef520cb ("null_blk: add configfs variables for 2 options"). The
test case can now be run with the built-in null_blk driver by specifying
shared_tag_bitmap through configfs.

Modify the test case for that purpose. Refer to the null_blk feature
list and check if shared_tag_bitmap can be specified through configfs.
If so, specify the parameter as an option of _configure_null_blk and set
it through configfs. If not, check in requires() that shared_tag_bitmap
can be specified as a module parameter. Then call _init_null_blk() in
test() and specify shared_tag_bitmap=1 at null_blk module load.

Also, change the null_blk device name from nullb0 to nullb1 since the
default null_blk device name nullb0 is not usable with the built-in
null_blk driver.

Reviewed-by: Chaitanya Kulkarni <kch@xxxxxxxxxx>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
---
 tests/block/031 | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/tests/block/031 b/tests/block/031
index d253af8..5ad6d88 100755
--- a/tests/block/031
+++ b/tests/block/031
@@ -11,30 +11,43 @@ DESCRIPTION="do IO on null-blk with a host tag set"
 TIMED=1
 
 requires() {
-	_have_fio && _have_null_blk && _have_module_param null_blk shared_tag_bitmap
+	_have_fio
+	_have_null_blk
+	if ! _have_null_blk_feature shared_tag_bitmap; then
+		_have_module_param null_blk shared_tag_bitmap
+	fi
 }
 
 test() {
 	local fio_status bs=512
+	local -a opts=(nullb1 completion_nsec=0 blocksize="$bs" size=1 \
+			      submit_queues="$(nproc)" memory_backed=1)
 
 	: "${TIMEOUT:=30}"
-	if ! _init_null_blk nr_devices=0 shared_tag_bitmap=1; then
-		echo "Loading null_blk failed"
-		return 1
+	# _configure_null_blk() sets null_blk parameters via configfs, while
+	# _init_null_blk() sets null_blk parameters as module parameters. Old
+	# kernels require shared_tag_bitmap as a module parameter. In that case,
+	# call _init_null_blk() for shared_tag_bitmap.
+	if _have_null_blk_feature shared_tag_bitmap; then
+		opts+=(shared_tag_bitmap=1)
+	else
+		if ! _init_null_blk shared_tag_bitmap=1; then
+			echo "Loading null_blk failed"
+			return 1
+		fi
 	fi
-	if ! _configure_null_blk nullb0 completion_nsec=0 blocksize=$bs size=1\
-	     submit_queues="$(nproc)" memory_backed=1 power=1; then
+	if ! _configure_null_blk "${opts[@]}" power=1; then
 		echo "Configuring null_blk failed"
 		return 1
 	fi
 	fio --verify=md5 --rw=randwrite --bs=$bs --loops=$((10**6)) \
 		--iodepth=64 --group_reporting --sync=1 --direct=1 \
 		--ioengine=libaio --runtime="${TIMEOUT}" --thread \
-		--name=block-031 --filename=/dev/nullb0 \
+		--name=block-031 --filename=/dev/nullb1 \
 		--output="${RESULTS_DIR}/block/fio-output-031.txt" \
 		>>"$FULL"
 	fio_status=$?
-	rmdir /sys/kernel/config/nullb/nullb0
+	rmdir /sys/kernel/config/nullb/nullb1
 	_exit_null_blk
 	case $fio_status in
 		0) echo "Passed";;
-- 
2.43.0





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux