[PATCH v16 00/12] Implement copy offload support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch series covers the points discussed in past and most recently
in LSFMM'23[0].
We have covered the initial agreed requirements in this patch set and
further additional features suggested by community.

This is next iteration of our previous patch set v15[1].
Copy offload is performed using two bio's -
1. Take a plug
2. The first bio containing source info is prepared and sent,
        a request is formed.
3. This is followed by preparing and sending the second bio containing the
        destination info.
4. This bio is merged with the request containing the source info.
5. The plug is released, and the request containing source and destination
        bio's is sent to the driver.
This design helps to avoid putting payload (token) in the request,
as sending payload that is not data to the device is considered a bad
approach.

So copy offload works only for request based storage drivers.
We can make use of copy emulation in case copy offload capability is
absent.

Overall series supports:
========================
	1. Driver
		- NVMe Copy command (single NS, TP 4065), including support
		in nvme-target (for block and file back end).

	2. Block layer
		- Block-generic copy (REQ_OP_COPY_DST/SRC), operation with
                  interface accommodating two block-devs
                - Merging copy requests in request layer
		- Emulation, for in-kernel user when offload is natively 
                absent
		- dm-linear support (for cases not requiring split)

	3. User-interface
		- copy_file_range

Testing
=======
	Copy offload can be tested on:
	a. QEMU: NVME simple copy (TP 4065). By setting nvme-ns
		parameters mssrl,mcl, msrc. For more info [2].
	b. Null block device
        c. NVMe Fabrics loopback.
	d. blktests[3]

	Emulation can be tested on any device.

	fio[4].

Infra and plumbing:
===================
        We populate copy_file_range callback in def_blk_fops. 
        For devices that support copy-offload, use blkdev_copy_offload to
        achieve in-device copy.
        However for cases, where device doesn't support offload,
        use generic_copy_file_range.
        For in-kernel users (like NVMe fabrics), use blkdev_copy_offload
        if device is copy offload capable or else use emulation 
        using blkdev_copy_emulation.
        Modify checks in generic_copy_file_range to support block-device.

Blktests[3]
======================
	tests/block/035-040: Runs copy offload and emulation on null
                              block device.
	tests/block/050,055: Runs copy offload and emulation on test
                              nvme block device.
        tests/nvme/056-067: Create a loop backed fabrics device and
                              run copy offload and emulation.

Future Work
===========
	- loopback device copy offload support
	- upstream fio to use copy offload
	- upstream blktest to test copy offload
        - update man pages for copy_file_range
        - expand in-kernel users of copy offload

	These are to be taken up after this minimal series is agreed upon.

Additional links:
=================
	[0] https://lore.kernel.org/linux-nvme/CA+1E3rJ7BZ7LjQXXTdX+-0Edz=zT14mmPGMiVCzUgB33C60tbQ@xxxxxxxxxxxxxx/
            https://lore.kernel.org/linux-nvme/f0e19ae4-b37a-e9a3-2be7-a5afb334a5c3@xxxxxxxxxx/
            https://lore.kernel.org/linux-nvme/20230113094648.15614-1-nj.shetty@xxxxxxxxxxx/
	[1] https://lore.kernel.org/all/20230906163844.18754-1-nj.shetty@xxxxxxxxxxx/
	[2] https://qemu-project.gitlab.io/qemu/system/devices/nvme.html#simple-copy
	[3] https://github.com/nitesh-shetty/blktests/tree/feat/copy_offload/v15
	[4] https://github.com/OpenMPDK/fio/tree/copyoffload-3.35-v14

Thanks for review!

Changes since v15:
=================
        - fs, nvmet: don't fallback to copy emulation for copy offload IO
                    failure, user can still use emulation by disabling
                    device offload (Hannes)
        - block: patch,function description changes (Hannes)
        - added Reviewed-by from Hannes and Luis.

Changes since v14:
=================
        - block: (Bart Van Assche)
            1. BLK_ prefix addition to COPY_MAX_BYES and COPY_MAX_SEGMENTS
            2. Improved function,patch,cover-letter description
            3. Simplified refcount updating.
        - null-blk, nvme:
            4. static warning fixes (kernel test robot)

Changes since v13:
=================
        - block:
            1. Simplified copy offload and emulation helpers, now
                  caller needs to decide between offload/emulation fallback
            2. src,dst bio order change (Christoph Hellwig)
            3. refcount changes similar to dio (Christoph Hellwig)
            4. Single outstanding IO for copy emulation (Christoph Hellwig)
            5. use copy_max_sectors to identify copy offload
                  capability and other reviews (Damien, Christoph)
            6. Return status in endio handler (Christoph Hellwig)
        - nvme-fabrics: fallback to emulation in case of partial
          offload completion
        - in kernel user addition (Ming lei)
        - indentation, documentation, minor fixes, misc changes (Damien,
          Christoph)
        - blktests changes to test kernel changes

Changes since v12:
=================
        - block,nvme: Replaced token based approach with request based
          single namespace capable approach (Christoph Hellwig)

Changes since v11:
=================
        - Documentation: Improved documentation (Damien Le Moal)
        - block,nvme: ssize_t return values (Darrick J. Wong)
        - block: token is allocated to SECTOR_SIZE (Matthew Wilcox)
        - block: mem leak fix (Maurizio Lombardi)

Changes since v10:
=================
        - NVMeOF: optimization in NVMe fabrics (Chaitanya Kulkarni)
        - NVMeOF: sparse warnings (kernel test robot)

Changes since v9:
=================
        - null_blk, improved documentation, minor fixes(Chaitanya Kulkarni)
        - fio, expanded testing and minor fixes (Vincent Fu)

Changes since v8:
=================
        - null_blk, copy_max_bytes_hw is made config fs parameter
          (Damien Le Moal)
        - Negative error handling in copy_file_range (Christian Brauner)
        - minor fixes, better documentation (Damien Le Moal)
        - fio upgraded to 3.34 (Vincent Fu)

Changes since v7:
=================
        - null block copy offload support for testing (Damien Le Moal)
        - adding direct flag check for copy offload to block device,
	  as we are using generic_copy_file_range for cached cases.
        - Minor fixes

Changes since v6:
=================
        - copy_file_range instead of ioctl for direct block device
        - Remove support for multi range (vectored) copy
        - Remove ioctl interface for copy.
        - Remove offload support in dm kcopyd.

Changes since v5:
=================
	- Addition of blktests (Chaitanya Kulkarni)
        - Minor fix for fabrics file backed path
        - Remove buggy zonefs copy file range implementation.

Changes since v4:
=================
	- make the offload and emulation design asynchronous (Hannes
	  Reinecke)
	- fabrics loopback support
	- sysfs naming improvements (Damien Le Moal)
	- use kfree() instead of kvfree() in cio_await_completion
	  (Damien Le Moal)
	- use ranges instead of rlist to represent range_entry (Damien
	  Le Moal)
	- change argument ordering in blk_copy_offload suggested (Damien
	  Le Moal)
	- removed multiple copy limit and merged into only one limit
	  (Damien Le Moal)
	- wrap overly long lines (Damien Le Moal)
	- other naming improvements and cleanups (Damien Le Moal)
	- correctly format the code example in description (Damien Le
	  Moal)
	- mark blk_copy_offload as static (kernel test robot)
	
Changes since v3:
=================
	- added copy_file_range support for zonefs
	- added documentation about new sysfs entries
	- incorporated review comments on v3
	- minor fixes

Changes since v2:
=================
	- fixed possible race condition reported by Damien Le Moal
	- new sysfs controls as suggested by Damien Le Moal
	- fixed possible memory leak reported by Dan Carpenter, lkp
	- minor fixes

Changes since v1:
=================
	- sysfs documentation (Greg KH)
        - 2 bios for copy operation (Bart Van Assche, Mikulas Patocka,
          Martin K. Petersen, Douglas Gilbert)
        - better payload design (Darrick J. Wong)

Anuj Gupta (1):
  fs/read_write: Enable copy_file_range for block device.

Nitesh Shetty (11):
  block: Introduce queue limits and sysfs for copy-offload support
  Add infrastructure for copy offload in block and request layer.
  block: add copy offload support
  block: add emulation for copy
  fs, block: copy_file_range for def_blk_ops for direct block device
  nvme: add copy offload support
  nvmet: add copy command support for bdev and file ns
  dm: Add support for copy offload
  dm: Enable copy offload for dm-linear target
  null: Enable trace capability for null block
  null_blk: add support for copy offload

 Documentation/ABI/stable/sysfs-block |  23 ++
 Documentation/block/null_blk.rst     |   5 +
 block/blk-core.c                     |   7 +
 block/blk-lib.c                      | 424 +++++++++++++++++++++++++++
 block/blk-merge.c                    |  41 +++
 block/blk-settings.c                 |  24 ++
 block/blk-sysfs.c                    |  36 +++
 block/blk.h                          |  16 +
 block/elevator.h                     |   1 +
 block/fops.c                         |  25 ++
 drivers/block/null_blk/Makefile      |   2 -
 drivers/block/null_blk/main.c        | 100 ++++++-
 drivers/block/null_blk/null_blk.h    |   1 +
 drivers/block/null_blk/trace.h       |  25 ++
 drivers/block/null_blk/zoned.c       |   1 -
 drivers/md/dm-linear.c               |   1 +
 drivers/md/dm-table.c                |  37 +++
 drivers/md/dm.c                      |   7 +
 drivers/nvme/host/constants.c        |   1 +
 drivers/nvme/host/core.c             |  79 +++++
 drivers/nvme/host/trace.c            |  19 ++
 drivers/nvme/target/admin-cmd.c      |   9 +-
 drivers/nvme/target/io-cmd-bdev.c    |  71 +++++
 drivers/nvme/target/io-cmd-file.c    |  50 ++++
 drivers/nvme/target/nvmet.h          |   1 +
 drivers/nvme/target/trace.c          |  19 ++
 fs/read_write.c                      |   8 +-
 include/linux/bio.h                  |   6 +-
 include/linux/blk_types.h            |  10 +
 include/linux/blkdev.h               |  22 ++
 include/linux/device-mapper.h        |   3 +
 include/linux/nvme.h                 |  43 ++-
 32 files changed, 1098 insertions(+), 19 deletions(-)


base-commit: 7fc7222d9680366edeecc219c21ca96310bdbc10
-- 
2.35.1.500.gb896f729e2




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux