ZRAM can have a backing device that could be used as a writeback device for the pages in RAM. The current writeback code (writeback_store()) does a synchronous single page size IO to the backing device. This series implements IO batching while doing a writeback to a backing device. The code still does synchronous IOs but with larger IO sizes whenever possible. This crosses off one of the TODO that was there as a part of writeback_store() function: A single page IO would be inefficient for write... The idea is to batch the IOs to a certain limit before the data is flushed to the backing device. The batch limit is initially chosen based on the bdi->io_pages value with an upper limit of 32 pages (128k on x86). Batching reduces the time of writeback of 4G data to a nvme backing device from 68 secs to 15 secs (more than **4x improvement**). The first 3 patches are prep. 4th patch implements the main logic for IO batching and the last patch is another cleanup. Perf: $ modprobe zram num_devices=1 $ echo "/dev/nvme0n1" > /sys/block/zram0/backing_dev $ echo 6G > /sys/block/zram0/disksize $ fio -iodepth=16 -rw=randwrite -ioengine=io_uring -bs=4k -numjobs=1 -size=4G -filename=/dev/zram0 -name=io_uring_1 > /dev/null $ echo all > /sys/block/zram0/idle Without changes: $ time echo idle > /sys/block/zram0/writeback real 1m8.648s (68 secs) user 0m0.000s sys 0m24.899s $ cat /sys/block/zram0/bd_stat 1048576 0 1048576 With changes: $ time echo idle > /sys/block/zram0/writeback real 0m15.496s (15 secs) user 0m0.000s sys 0m7.789s $ cat /sys/block/zram0/bd_stat 1048576 0 1048576 Testing: A basic End-End testing (based on Sergey's test flow [1]): 1) configure zram0 and add a nvme device as a writeback device 2) Get the sha256sum of a tarball 3) mkfs.ext4 on zram0, cp tarball 4) idle writeback 5) cp tarball from zram0 to another device (reread writeback pages) and compare the sha256sum again The sha before and after are verified to be the same. Writeback limit testing: 1) configure zram0 and add a nvme device as a writeback device 2) Set writeback limit and enable 3) Do a fio that crosses the writeback limit 4) idle writeback 5) Verify the writeback is limited to the set writeback limit value $ modprobe zram num_devices=1 $ echo "/dev/nvme0n1" > /sys/block/zram0/backing_dev $ echo 4G > /sys/block/zram0/disksize $ echo 1 > /sys/block/zram0/writeback_limit_enable $ echo 1002 > /sys/block/zram0/writeback_limit $ fio -iodepth=16 -rw=write -ioengine=io_uring -bs=4k -numjobs=1 -size=10M -filename=/dev/zram0 -name=io_uring_1 $ echo all > /sys/block/zram0/idle $ echo idle > /sys/block/zram0/writeback $ cat /sys/block/zram0/bd_stat 1002 0 1002 writeback is limited to the set value. [1] https://lore.kernel.org/lkml/20230806071601.GB907732@xxxxxxxxxx/ Pankaj Raghav (5): zram: move index preparation to a separate function in writeback_store zram: encapsulate writeback to the backing bdev in a function zram: add alloc_block_bdev_range() and free_block_bdev_range() zram: batch IOs during writeback to improve performance zram: don't overload blk_idx variable in writeback_store() drivers/block/zram/zram_drv.c | 318 ++++++++++++++++++++++------------ 1 file changed, 210 insertions(+), 108 deletions(-) base-commit: 7bc675554773f09d88101bf1ccfc8537dc7c0be9 -- 2.40.1
