>From the UFSHCI 4.0 specification, about the legacy (single queue) mode:
"The host controller always process transfer requests in-order according
to the order submitted to the list. In case of multiple commands with
single doorbell register ringing (batch mode), The dispatch order for
these transfer requests by host controller will base on their index in
the List. A transfer request with lower index value will be executed
before a transfer request with higher index value."
>From the UFSHCI 4.0 specification, about the MCQ mode:
"Command Submission
1. Host SW writes an Entry to SQ
2. Host SW updates SQ doorbell tail pointer
Command Processing
3. After fetching the Entry, Host Controller updates SQ doorbell head
pointer
4. Host controller sends COMMAND UPIU to UFS device"
In other words, for both legacy and MCQ mode, UFS controllers are
required to forward commands to the UFS device in the order these
commands have been received from the host.
Notes:
- For legacy mode this is only correct if the host submits one
command at a time. The UFS driver does this.
- Also in legacy mode, the command order is not preserved if
auto-hibernation is enabled in the UFS controller. Hence, enable
zone write locking if auto-hibernation is enabled.
This patch improves performance as follows on my test setup:
- With the mq-deadline scheduler: 2.5x more IOPS for small writes.
- When not using an I/O scheduler compared to using mq-deadline with
zone locking: 4x more IOPS for small writes.
Cc: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Cc: Can Guo <quic_cang@xxxxxxxxxxx>
Cc: Avri Altman <avri.altman@xxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Damien Le Moal <dlemoal@xxxxxxxxxx>
Cc: Ming Lei <ming.lei@xxxxxxxxxx>
Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
---
drivers/ufs/core/ufshcd.c | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index ae7b868f9c26..ae6b63b02930 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -4337,23 +4337,50 @@ int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
}
EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_exit);
+static void ufshcd_update_zone_write_lock(struct ufs_hba *hba,
+ bool use_zone_write_lock)
+{
+ struct scsi_device *sdev;
+
+ shost_for_each_device(sdev, hba->host)
+ blk_freeze_queue_start(sdev->request_queue);
+ shost_for_each_device(sdev, hba->host) {
+ struct request_queue *q = sdev->request_queue;
+
+ blk_mq_freeze_queue_wait(q);
+ q->limits.use_zone_write_lock = use_zone_write_lock;
+ blk_mq_unfreeze_queue(q);
+ }
+}
+
void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
{
unsigned long flags;
- bool update = false;
+ bool prev_state, new_state, update = false;
if (!ufshcd_is_auto_hibern8_supported(hba))
return;
spin_lock_irqsave(hba->host->host_lock, flags);
+ prev_state = ufshcd_is_auto_hibern8_enabled(hba);
if (hba->ahit != ahit) {
hba->ahit = ahit;
update = true;
}
+ new_state = ufshcd_is_auto_hibern8_enabled(hba);
spin_unlock_irqrestore(hba->host->host_lock, flags);
if (!update)
return;
+ if (!is_mcq_enabled(hba) && !prev_state && new_state) {
+ /*
+ * Auto-hibernation will be enabled. Enable write locking for
+ * zoned writes since auto-hibernation may cause reordering of
+ * zoned writes when using the legacy mode of the UFS host
+ * controller.
+ */
+ ufshcd_update_zone_write_lock(hba, true);
+ }
if (!pm_runtime_suspended(&hba->ufs_device_wlun->sdev_gendev)) {
ufshcd_rpm_get_sync(hba);
ufshcd_hold(hba);
@@ -4361,6 +4388,13 @@ void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
ufshcd_release(hba);
ufshcd_rpm_put_sync(hba);
}
+ if (!is_mcq_enabled(hba) && prev_state && !new_state) {
+ /*
+ * Auto-hibernation has been disabled. Disable write locking
+ * for zoned writes.
+ */
+ ufshcd_update_zone_write_lock(hba, false);
+ }
}
EXPORT_SYMBOL_GPL(ufshcd_auto_hibern8_update);
@@ -5140,6 +5174,7 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
ufshcd_hpb_configure(hba, sdev);
+ q->limits.use_zone_write_lock = false;
blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
if (hba->quirks & UFSHCD_QUIRK_4KB_DMA_ALIGNMENT)
blk_queue_update_dma_alignment(q, SZ_4K - 1);
