[PATCH v7 3/7] scsi: core: Retry unaligned zoned writes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If zoned writes (REQ_OP_WRITE) for a sequential write required zone have
a starting LBA that differs from the write pointer, e.g. because zoned
writes have been reordered, then the storage device will respond with an
UNALIGNED WRITE COMMAND error. Send commands that failed with an
unaligned write error to the SCSI error handler if zone write locking is
disabled. Let the SCSI error handler sort SCSI commands per LBA before
resubmitting these.

If zone write locking is disabled, increase the number of retries for
write commands sent to a sequential zone to the maximum number of
outstanding commands because in the worst case the number of times
reordered zoned writes have to be retried is (number of outstanding
writes per sequential zone) - 1.

Cc: Damien Le Moal <dlemoal@xxxxxxxxxx>
Cc: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Ming Lei <ming.lei@xxxxxxxxxx>
Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
---
 drivers/scsi/scsi_error.c | 37 +++++++++++++++++++++++++++++++++++++
 drivers/scsi/scsi_lib.c   |  1 +
 drivers/scsi/sd.c         |  3 +++
 include/scsi/scsi.h       |  1 +
 4 files changed, 42 insertions(+)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index c67cdcdc3ba8..c624b9c8fdab 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -27,6 +27,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
+#include <linux/list_sort.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -698,6 +699,16 @@ enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
 		fallthrough;
 
 	case ILLEGAL_REQUEST:
+		/*
+		 * Unaligned write command. This may indicate that zoned writes
+		 * have been received by the device in the wrong order. If zone
+		 * write locking is disabled, retry after all pending commands
+		 * have completed.
+		 */
+		if (sshdr.asc == 0x21 && sshdr.ascq == 0x04 &&
+		    scsi_cmd_to_rq(scmd)->q->limits.use_zone_write_lock)
+			return NEEDS_DELAYED_RETRY;
+
 		if (sshdr.asc == 0x20 || /* Invalid command operation code */
 		    sshdr.asc == 0x21 || /* Logical block address out of range */
 		    sshdr.asc == 0x22 || /* Invalid function */
@@ -2186,6 +2197,25 @@ void scsi_eh_ready_devs(struct Scsi_Host *shost,
 }
 EXPORT_SYMBOL_GPL(scsi_eh_ready_devs);
 
+/*
+ * Returns a negative value if @_a has a lower starting sector than @_b, zero if
+ * both have the same starting sector and a positive value otherwise.
+ */
+static int scsi_cmp_sector(void *priv, const struct list_head *_a,
+			   const struct list_head *_b)
+{
+	struct scsi_cmnd *a = list_entry(_a, typeof(*a), eh_entry);
+	struct scsi_cmnd *b = list_entry(_b, typeof(*b), eh_entry);
+	const sector_t pos_a = blk_rq_pos(scsi_cmd_to_rq(a));
+	const sector_t pos_b = blk_rq_pos(scsi_cmd_to_rq(b));
+
+	if (pos_a < pos_b)
+		return -1;
+	if (pos_a > pos_b)
+		return 1;
+	return 0;
+}
+
 /**
  * scsi_eh_flush_done_q - finish processed commands or retry them.
  * @done_q:	list_head of processed commands.
@@ -2194,6 +2224,13 @@ void scsi_eh_flush_done_q(struct list_head *done_q)
 {
 	struct scsi_cmnd *scmd, *next;
 
+	/*
+	 * Sort pending SCSI commands in starting sector order. This is
+	 * important if one of the SCSI devices associated with @shost is a
+	 * zoned block device for which zone write locking is disabled.
+	 */
+	list_sort(NULL, done_q, scsi_cmp_sector);
+
 	list_for_each_entry_safe(scmd, next, done_q, eh_entry) {
 		list_del_init(&scmd->eh_entry);
 		if (scsi_device_online(scmd->device) &&
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 59176946ab56..69da8aee13df 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1443,6 +1443,7 @@ static void scsi_complete(struct request *rq)
 	case ADD_TO_MLQUEUE:
 		scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
 		break;
+	case NEEDS_DELAYED_RETRY:
 	default:
 		scsi_eh_scmd_add(cmd);
 		break;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3c668cfb146d..3716392daa2c 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1235,6 +1235,9 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 	cmd->transfersize = sdp->sector_size;
 	cmd->underflow = nr_blocks << 9;
 	cmd->allowed = sdkp->max_retries;
+	if (rq->q->limits.use_zone_write_lock &&
+	    blk_rq_is_seq_zoned_write(rq))
+		cmd->allowed += rq->q->nr_requests;
 	cmd->sdb.length = nr_blocks * sdp->sector_size;
 
 	SCSI_LOG_HLQUEUE(1,
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index ec093594ba53..6600db046227 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -93,6 +93,7 @@ static inline int scsi_status_is_check_condition(int status)
  * Internal return values.
  */
 enum scsi_disposition {
+	NEEDS_DELAYED_RETRY	= 0x2000,
 	NEEDS_RETRY		= 0x2001,
 	SUCCESS			= 0x2002,
 	FAILED			= 0x2003,



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux