[PATCH 0/2] multi-page bvec configuration for integrity payload

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In the case of NVMe, it has an integrity payload consisting of one segment.
So, rather than configuring SG_LIST, it was changed by direct DMA mapping.

The page-merge is not performed for the struct bio_vec when creating 
a integrity payload in block.
As a result, when creating an integrity paylaod beyond one page, each 
struct bio_vec is generated, and its bv_len does not exceed the PAGESIZE.

To solve it, bio_integrity_add_page() should just add to the existing 
bvec, similar to bio_add_page() and friends. 
As the bip configuration changed, the code related to sg_list was
also modified.

(ref: https://lore.kernel.org/linux-nvme/yq18rewbmay.fsf@xxxxxxxxxxxxxxxxxxxx/T/#t)


Tested like this:

- Format (support pi)
$ sudo nvme format /dev/nvme2n1 --force -n 1 -i 1 -p 0 -m 0 -l 1 -r

- Run FIO
[global]
ioengine=libaio
group_reporting

[job]
bs=512k
iodepth=256
rw=write
numjobs=8
direct=1
runtime=10s
filename=/dev/nvme2n1

- Result
...
[   93.496218] nvme2n1: I/O Cmd(0x1) @ LBA 62464, 1024 blocks, I/O Error (sct 0x2 / sc 0x82) MORE
[   93.496227] protection error, dev nvme2n1, sector 62464 op 0x1:(WRITE) flags 0x18800 phys_seg 3 prio class 2
[   93.538788] nvme2n1: I/O Cmd(0x1) @ LBA 6144, 1024 blocks, I/O Error (sct 0x2 / sc 0x82) MORE
[   93.538798] protection error, dev nvme2n1, sector 6144 op 0x1:(WRITE) flags 0x18800 phys_seg 3 prio class 2
[   93.566231] nvme2n1: I/O Cmd(0x1) @ LBA 124928, 1024 blocks, I/O Error (sct 0x0 / sc 0x4)
[   93.566241] I/O error, dev nvme2n1, sector 124928 op 0x1:(WRITE) flags 0x18800 phys_seg 3 prio class 2
[   93.694147] nvme2n1: I/O Cmd(0x1) @ LBA 64512, 1024 blocks, I/O Error (sct 0x2 / sc 0x82) MORE
[   93.694155] protection error, dev nvme2n1, sector 64512 op 0x1:(WRITE) flags 0x18800 phys_seg 3 prio class 2
[   93.694299] nvme2n1: I/O Cmd(0x1) @ LBA 5120, 1024 blocks, I/O Error (sct 0x2 / sc 0x82) MORE
[   93.694305] protection error, dev nvme2n1, sector 5120 op 0x1:(WRITE) flags 0x18800 phys_seg 3 prio class 2
...

Jinyoung Choi (2):
  block: make bvec_try_merge_hw_page() non-static
  bio-integrity: create multi-page bvecs in bio_integrity_add_page()

 block/bio-integrity.c | 50 ++++++++++++++++++++++++-------------------
 block/bio.c           |  2 +-
 block/blk.h           |  4 ++++
 3 files changed, 33 insertions(+), 23 deletions(-)

-- 
2.34.1



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux