Re: [PATCH v6 5/5] loop: Add support for provision requests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 15, 2023 at 5:37 AM Brian Foster <bfoster@xxxxxxxxxx> wrote:
>
> On Fri, May 05, 2023 at 11:29:09PM -0700, Sarthak Kukreti wrote:
> > Add support for provision requests to loopback devices.
> > Loop devices will configure provision support based on
> > whether the underlying block device/file can support
> > the provision request and upon receiving a provision bio,
> > will map it to the backing device/storage. For loop devices
> > over files, a REQ_OP_PROVISION request will translate to
> > an fallocate mode 0 call on the backing file.
> >
> > Signed-off-by: Sarthak Kukreti <sarthakkukreti@xxxxxxxxxxxx>
> > ---
> >  drivers/block/loop.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 42 insertions(+)
> >
> > diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> > index bc31bb7072a2..13c4b4f8b9c1 100644
> > --- a/drivers/block/loop.c
> > +++ b/drivers/block/loop.c
> > @@ -327,6 +327,24 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
> >       return ret;
> >  }
> >
> > +static int lo_req_provision(struct loop_device *lo, struct request *rq, loff_t pos)
> > +{
> > +     struct file *file = lo->lo_backing_file;
> > +     struct request_queue *q = lo->lo_queue;
> > +     int ret;
> > +
> > +     if (!q->limits.max_provision_sectors) {
> > +             ret = -EOPNOTSUPP;
> > +             goto out;
> > +     }
> > +
> > +     ret = file->f_op->fallocate(file, 0, pos, blk_rq_bytes(rq));
> > +     if (unlikely(ret && ret != -EINVAL && ret != -EOPNOTSUPP))
> > +             ret = -EIO;
> > + out:
> > +     return ret;
> > +}
> > +
> >  static int lo_req_flush(struct loop_device *lo, struct request *rq)
> >  {
> >       int ret = vfs_fsync(lo->lo_backing_file, 0);
> > @@ -488,6 +506,8 @@ static int do_req_filebacked(struct loop_device *lo, struct request *rq)
> >                               FALLOC_FL_PUNCH_HOLE);
> >       case REQ_OP_DISCARD:
> >               return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE);
> > +     case REQ_OP_PROVISION:
> > +             return lo_req_provision(lo, rq, pos);
>
> Hi Sarthak,
>
> The only thing that stands out to me is the separate lo_req_provision()
> helper here. It seems it might be a little cleaner to extend and reuse
> lo_req_fallocate()..? But that's not something I feel strongly about, so
> this all looks pretty good to me either way, FWIW.
>
Fair point, I think that should shorten the patch (and for
correctness, we'd want to add FALLOC_FL_KEEP_SIZE for REQ_OP_PROVISION
too). I'll fix this up in v7.

Best
Sarthak

> Brian
>
> >       case REQ_OP_WRITE:
> >               if (cmd->use_aio)
> >                       return lo_rw_aio(lo, cmd, pos, ITER_SOURCE);
> > @@ -754,6 +774,25 @@ static void loop_sysfs_exit(struct loop_device *lo)
> >                                  &loop_attribute_group);
> >  }
> >
> > +static void loop_config_provision(struct loop_device *lo)
> > +{
> > +     struct file *file = lo->lo_backing_file;
> > +     struct inode *inode = file->f_mapping->host;
> > +
> > +     /*
> > +      * If the backing device is a block device, mirror its provisioning
> > +      * capability.
> > +      */
> > +     if (S_ISBLK(inode->i_mode)) {
> > +             blk_queue_max_provision_sectors(lo->lo_queue,
> > +                     bdev_max_provision_sectors(I_BDEV(inode)));
> > +     } else if (file->f_op->fallocate) {
> > +             blk_queue_max_provision_sectors(lo->lo_queue, UINT_MAX >> 9);
> > +     } else {
> > +             blk_queue_max_provision_sectors(lo->lo_queue, 0);
> > +     }
> > +}
> > +
> >  static void loop_config_discard(struct loop_device *lo)
> >  {
> >       struct file *file = lo->lo_backing_file;
> > @@ -1092,6 +1131,7 @@ static int loop_configure(struct loop_device *lo, fmode_t mode,
> >       blk_queue_io_min(lo->lo_queue, bsize);
> >
> >       loop_config_discard(lo);
> > +     loop_config_provision(lo);
> >       loop_update_rotational(lo);
> >       loop_update_dio(lo);
> >       loop_sysfs_init(lo);
> > @@ -1304,6 +1344,7 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info)
> >       }
> >
> >       loop_config_discard(lo);
> > +     loop_config_provision(lo);
> >
> >       /* update dio if lo_offset or transfer is changed */
> >       __loop_update_dio(lo, lo->use_dio);
> > @@ -1830,6 +1871,7 @@ static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx,
> >       case REQ_OP_FLUSH:
> >       case REQ_OP_DISCARD:
> >       case REQ_OP_WRITE_ZEROES:
> > +     case REQ_OP_PROVISION:
> >               cmd->use_aio = false;
> >               break;
> >       default:
> > --
> > 2.40.1.521.gf1e218fcd8-goog
> >
>




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux