Commit "mpt3sas: Force request partial completion alignment" was not
considering the case of REQ_TYPE_FS commands not operating on sector
size units (e.g. REQ_OP_ZONE_REPORT and its 64B aligned partial
replies). This could result is incorrectly retrying (forever) those
commands.
Move the partial completion alignement check of mpt3sas to sd_done so
that the check comes after good_bytes & resid corrections of done in
that function depending on the request command to avoid false positive.
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
---
Changes from v2:
- Fixed good_bytes calculation after correction of unaligned resid
It should be good_bytes=scsi_buflen() - resid, and not good_bytes-=resid
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 15 ---------------
drivers/scsi/sd.c | 20 ++++++++++++++++++++
2 files changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 0b5b423..1961535 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4658,7 +4658,6 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
struct MPT3SAS_DEVICE *sas_device_priv_data;
u32 response_code = 0;
unsigned long flags;
- unsigned int sector_sz;
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
@@ -4717,20 +4716,6 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
}
xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
-
- /* In case of bogus fw or device, we could end up having
- * unaligned partial completion. We can force alignment here,
- * then scsi-ml does not need to handle this misbehavior.
- */
- sector_sz = scmd->device->sector_size;
- if (unlikely(scmd->request->cmd_type == REQ_TYPE_FS && sector_sz &&
- xfer_cnt % sector_sz)) {
- sdev_printk(KERN_INFO, scmd->device,
- "unaligned partial completion avoided (xfer_cnt=%u, sector_sz=%u)\n",
- xfer_cnt, sector_sz);
- xfer_cnt = round_down(xfer_cnt, sector_sz);
- }
-
scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1f5d92a..2f70b36 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1790,6 +1790,8 @@ static int sd_done(struct scsi_cmnd *SCpnt)
{
int result = SCpnt->result;
unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
+ unsigned int sector_size = SCpnt->device->sector_size;
+ unsigned int resid;
struct scsi_sense_hdr sshdr;
struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
struct request *req = SCpnt->request;
@@ -1829,6 +1831,24 @@ static int sd_done(struct scsi_cmnd *SCpnt)
}
sdkp->medium_access_timed_out = 0;
+ /*
+ * In case of bogus fw or device, we could end up having
+ * unaligned partial completion. Check this here and force
+ * alignment.
+ */
+ resid = scsi_get_resid(SCpnt);
+ if (resid & (sector_size - 1)) {
+ SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
+ "Unaligned partial completion (resid=%u, sector_sz=%u)\n",
+ resid, sector_size));
+ resid = round_up(resid, sector_size);
+ if (resid < scsi_bufflen(SCpnt))
+ good_bytes = scsi_bufflen(SCpnt) - resid;
+ else
+ good_bytes = 0;
+ scsi_set_resid(SCpnt, resid);
+ }
+
if (driver_byte(result) != DRIVER_SENSE &&
(!sense_valid || sense_deferred))
goto out;
--
2.9.3
