This patch set implements the NVMe over Fabrics RDMA host and the target drivers. The host driver is tied into the NVMe host stack and implements the RDMA transport under the NVMe core and Fabrics modules. The NVMe over Fabrics RDMA host module is responsible for establishing a connection against a given target/controller, RDMA event handling and data-plane command processing. The target driver hooks into the NVMe target core stack and implements the RDMA transport. The module is responsible for RDMA connection establishment, RDMA event handling and data-plane RDMA commands processing. RDMA connection establishment is done using RDMA/CM and IP resolution. The data-plane command sequence follows the classic storage model where the target pushes/pulls the data. Changes since V1: - updates for req_op changes in for-next (me) - validate adrfam in nvmet-rdma (Ming) - don't leak rsp structures on connect failure in nvmet-rdma (Steve) - don't use RDMA/CM errors codes in reject path in nvmet-rdma (Steve) - fix nvmet_rdma_delete_ctrl (me) - invoke fatal error on error completion in nvmet-rdma (Sagi) - don't leak rsp structure on disconnected queue in nvmet-rdma (Ming) - properly set the SGL flag on AERs in nvme-rdma (me) - correctly stop the keep alive timer on reconnect in nvme-rdma (Ming) - stop and drain queues before freeing the tagset in nvet-rdma (Steve) -- To unsubscribe from this list: send the line "unsubscribe linux-block" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
