Re: [PATCH v2 5/5] dax: handle media errors in dax_do_io

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2016-04-25 at 01:31 -0700, hch@xxxxxxxxxxxxx wrote:
> On Sat, Apr 23, 2016 at 06:08:37PM +0000, Verma, Vishal L wrote:
> > 
> > direct_IO might fail with -EINVAL due to misalignment, or -ENOMEM
> > due
> > to some allocation failing, and I thought we should return the
> > original
> > -EIO in such cases so that the application doesn't lose the
> > information
> > that the bad block is actually causing the error.
> EINVAL is a concern here.  Not due to the right error reported, but
> because it means your current scheme is fundamentally broken - we
> need to support I/O at any alignment for DAX I/O, and not fail due to
> alignbment concernes for a highly specific degraded case.
> 
> I think this whole series need to go back to the drawing board as I
> don't think it can actually rely on using direct I/O as the EIO
> fallback.
> 
Agreed that DAX I/O can happen with any size/alignment, but how else do
we send an IO through the driver without alignment restrictions? Also,
the granularity at which we store badblocks is 512B sectors, so it
seems natural that to clear such a sector, you'd expect to send a write
to the whole sector.

The expected usage flow is:

- Application hits EIO doing dax_IO or load/store io

- It checks badblocks and discovers it's files have lost data

- It write()s those sectors (possibly converted to file offsets using
fiemap)
    * This triggers the fallback path, but if the application is doing
this level of recovery, it will know the sector is bad, and write the
entire sector

- Or it replaces the entire file from backup also using write() (not
mmap+stores)
    * This just frees the fs block, and the next time the block is
reallocated by the fs, it will likely be zeroed first, and that will be
done through the driver and will clear errors


I think if we want to keep allowing arbitrary alignments for the
dax_do_io path, we'd need:
1. To represent badblocks at a finer granularity (likely cache lines)
2. To allow the driver to do IO to a *block device* at sub-sector
granularity

Can we do that?��.n��������+%������w��{.n�����{����n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�

[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux