Re: [PATCH 1/4] block: fix module reference leak on put_disk() call for cgroups throttle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 01.02.2016 15:51, Roman Pen wrote:
get_disk(),get_gendisk() calls have non explicit side effect: they
increase the reference on the disk owner module.

The following is the correct sequence how to get a disk reference and
to put it:

     disk = get_gendisk(...);

     /* use disk */

     owner = disk->fops->owner;
     put_disk(disk);
     module_put(owner);

fs/block_dev.c is aware of this required module_put() call, but f.e.
blkg_conf_finish(), which is located in block/blk-cgroup.c, does not put
a module reference.  To see a leakage in action cgroups throttle config
can be used.  In the following script I'm removing throttle for /dev/ram0
(actually this is NOP, because throttle was never set for this device):

     # lsmod | grep brd
     brd                     5175  0
     # i=100; while [ $i -gt 0 ]; do echo "1:0 0" > \
         /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device; i=$(($i - 1)); \
     done
     # lsmod | grep brd
     brd                     5175  100

Now brd module has 100 references.

I hope this patch would be merged into stable versions.
I've tested the patch with v3.12.45 on my server.

Before apply the patch, reference count was leaked.
# lsmod | grep loop
loop                   16091  0
# echo "7:0 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
# lsmod | grep loop
loop                   16091  1
# echo "7:0 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
# lsmod | grep loop
loop                   16091  2
# echo "7:0 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
# lsmod | grep loop
loop                   16091  3
# echo "7:0 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
# lsmod | grep loop
loop                   16091  4

After apply the patch, reference count was still:
# lsmod | grep loop
loop                   19171  0
# echo "7:0 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
# lsmod | grep loop
loop                   19171  0
# echo "7:0 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
# lsmod | grep loop
loop                   19171  0
# echo "7:0 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
# lsmod | grep loop
loop                   19171  0


--
Best regards,
Gi-Oh Kim

--
To unsubscribe from this list: send the line "unsubscribe linux-block" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux