[PATCH 2/9] bcache: discard_granularity should not be smaller than a sector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Just like all block I/O, discards are in units of sectors.  Thus setting a
smaller than sector size discard limit in case of > 512 byte sectors in
bcache doesn't make sense.  Always set the discard granularity to 512
bytes instead.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
 drivers/md/bcache/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index bfe1685dbae574..ecc1447f202a42 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -954,7 +954,7 @@ static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
 	q->limits.max_segment_size	= UINT_MAX;
 	q->limits.max_segments		= BIO_MAX_VECS;
 	blk_queue_max_discard_sectors(q, UINT_MAX);
-	q->limits.discard_granularity	= 512;
+	q->limits.discard_granularity	= block_size;
 	q->limits.io_min		= block_size;
 	q->limits.logical_block_size	= block_size;
 	q->limits.physical_block_size	= block_size;

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM Kernel]     [Linux Filesystem Development]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux