The kworker routine update_writeback_rate() is schedued to update the
writeback rate in every 5 seconds by default. Before calling
__update_writeback_rate() to do real job, semaphore dc->writeback_lock
should be held by the kworker routine.
At the same time, bcache writeback thread routine bch_writeback_thread()
also needs to hold dc->writeback_lock before flushing dirty data back
into the backing device. If the dirty data set is large, it might be
very long time for bch_writeback_thread() to scan all dirty buckets and
releases dc->writeback_lock. In such case update_writeback_rate() can be
starved for long enough time so that kernel reports a soft lockup warn-
ing started like:
watchdog: BUG: soft lockup - CPU#246 stuck for 23s! [kworker/246:31:179713]
Such soft lockup condition is unnecessary, because after the writeback
thread finishes its job and releases dc->writeback_lock, the kworker
update_writeback_rate() may continue to work and everything is fine
indeed.
This patch avoids the unnecessary soft lockup by the following method,
- Add new members to struct cached_dev
- dc->retry_nr (0 by default)
- dc->retry_max (5 by default)
- In update_writeback_rate() call down_read_trylock(&dc->writeback_lock)
firstly, if it fails then lock contention happens. Then dc->retry_nr
adds 1, and mark contention as true
- If dc->retry_nr <= dc->retry_max, give up updating the writeback rate
and reschedules the kworker to retry after a longer time.
- If dc->retry_nr > dc->retry_max, no retry anymore and call
down_read(&dc->writeback_lock) to wait for the lock.
By the above method, at worst case update_writeback_rate() may retry for
1+ minutes before blocking on dc->writeback_lock by calling down_read().
For a 4TB cache device with 1TB dirty data, 90%+ of the unnecessary soft
lockup warning message can be avoided.
When retrying to acquire dc->writeback_lock in update_writeback_rate(),
of course the writeback rate cannot be updated. It is fair, because when
the kworker is blocked on the lock contention of dc->writeback_lock, the
writeback rate cannot be updated neither.
Signed-off-by: Coly Li <colyli@xxxxxxx>
---
drivers/md/bcache/bcache.h | 7 ++++++
drivers/md/bcache/writeback.c | 45 +++++++++++++++++++++++++++++++----
2 files changed, 47 insertions(+), 5 deletions(-)
diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
index 9ed9c955add7..82b86b874294 100644
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -395,6 +395,13 @@ struct cached_dev {
atomic_t io_errors;
unsigned int error_limit;
unsigned int offline_seconds;
+
+ /*
+ * Retry to update writeback_rate if contention happens for
+ * down_read(dc->writeback_lock) in update_writeback_rate()
+ */
+ unsigned int retry_nr;
+ unsigned int retry_max;
};
enum alloc_reserve {
diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c
index d138a2d73240..c51671abe74e 100644
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -214,6 +214,7 @@ static void update_writeback_rate(struct work_struct *work)
struct cached_dev,
writeback_rate_update);
struct cache_set *c = dc->disk.c;
+ bool contention = false;
/*
* should check BCACHE_DEV_RATE_DW_RUNNING before calling
@@ -243,13 +244,41 @@ static void update_writeback_rate(struct work_struct *work)
* in maximum writeback rate number(s).
*/
if (!set_at_max_writeback_rate(c, dc)) {
- down_read(&dc->writeback_lock);
- __update_writeback_rate(dc);
- update_gc_after_writeback(c);
- up_read(&dc->writeback_lock);
+ /*
+ * When contention happens on dc->writeback_lock with
+ * the writeback thread, this kwork may be blocked for
+ * very long time if there are too many dirty data to
+ * writeback, and kerne message will complain a (bogus)
+ * software lockup kernel message. To avoid potential
+ * starving, if down_read_trylock() fails, writeback
+ * rate updating will be skipped for dc->retry_max times
+ * at most while delay this worker a bit longer time.
+ * If dc->retry_max times are tried and the trylock
+ * still fails, then call down_read() to wait for
+ * dc->writeback_lock.
+ */
+ if (!down_read_trylock((&dc->writeback_lock))) {
+ contention = true;
+ dc->retry_nr++;
+ if (dc->retry_nr > dc->retry_max)
+ down_read(&dc->writeback_lock);
+ }
+
+ if (!contention || dc->retry_nr > dc->retry_max) {
+ __update_writeback_rate(dc);
+ update_gc_after_writeback(c);
+ up_read(&dc->writeback_lock);
+ dc->retry_nr = 0;
+ }
}
}
+ /*
+ * In case no lock contention on dc->writeback_lock happens since
+ * last retry, e.g. cache is clean or I/O idle for a while.
+ */
+ if (!contention && dc->retry_nr)
+ dc->retry_nr = 0;
/*
* CACHE_SET_IO_DISABLE might be set via sysfs interface,
@@ -257,8 +286,10 @@ static void update_writeback_rate(struct work_struct *work)
*/
if (test_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags) &&
!test_bit(CACHE_SET_IO_DISABLE, &c->flags)) {
+ unsigned int scale = 1 + dc->retry_nr;
+
schedule_delayed_work(&dc->writeback_rate_update,
- dc->writeback_rate_update_seconds * HZ);
+ dc->writeback_rate_update_seconds * scale * HZ);
}
/*
@@ -1006,6 +1037,10 @@ void bch_cached_dev_writeback_init(struct cached_dev *dc)
dc->writeback_rate_fp_term_high = 1000;
dc->writeback_rate_i_term_inverse = 10000;
+ /* For dc->writeback_lock contention in update_writeback_rate() */
+ dc->retry_nr = 0;
+ dc->retry_max = 5;
+
WARN_ON(test_and_clear_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags));
INIT_DELAYED_WORK(&dc->writeback_rate_update, update_writeback_rate);
}
--
2.35.3
