On 2020/8/5 17:22, Jinpu Wang wrote:
> Hi Coly,
>
> one question below:
> Coly Li <colyli@xxxxxxx> 于2020年8月5日周三 上午8:36写道：
>>
>> If create a loop device with a backing NVMe SSD, current loop device
>> driver doesn't correctly set its queue's limits.discard_granularity and
>> leaves it as 0. If a discard request at LBA 0 on this loop device, in
>> __blkdev_issue_discard() the calculated req_sects will be 0, and a zero
>> length discard request will trigger a BUG() panic in generic block layer
>> code at block/blk-mq.c:563.
>>
>> [ 955.565006][ C39] ------------[ cut here ]------------
>> [ 955.559660][ C39] invalid opcode: 0000 [#1] SMP NOPTI
>> [ 955.622171][ C39] CPU: 39 PID: 248 Comm: ksoftirqd/39 Tainted: G E 5.8.0-default+ #40
>> [ 955.622171][ C39] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE160M-2.70]- 07/17/2020
>> [ 955.622175][ C39] RIP: 0010:blk_mq_end_request+0x107/0x110
>> [ 955.622177][ C39] Code: 48 8b 03 e9 59 ff ff ff 48 89 df 5b 5d 41 5c e9 9f ed ff ff 48 8b 35 98 3c f4 00 48 83 c7 10 48 83 c6 19 e8 cb 56 c9 ff eb cb <0f> 0b 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 54
>> [ 955.622179][ C39] RSP: 0018:ffffb1288701fe28 EFLAGS: 00010202
>> [ 955.749277][ C39] RAX: 0000000000000001 RBX: ffff956fffba5080 RCX: 0000000000004003
>> [ 955.749278][ C39] RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000000
>> [ 955.749279][ C39] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
>> [ 955.749279][ C39] R10: ffffb1288701fd28 R11: 0000000000000001 R12: ffffffffa8e05160
>> [ 955.749280][ C39] R13: 0000000000000004 R14: 0000000000000004 R15: ffffffffa7ad3a1e
>> [ 955.749281][ C39] FS: 0000000000000000(0000) GS:ffff95bfbda00000(0000) knlGS:0000000000000000
>> [ 955.749282][ C39] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 955.749282][ C39] CR2: 00007f6f0ef766a8 CR3: 0000005a37012002 CR4: 00000000007606e0
>> [ 955.749283][ C39] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [ 955.749284][ C39] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>> [ 955.749284][ C39] PKRU: 55555554
>> [ 955.749285][ C39] Call Trace:
>> [ 955.749290][ C39] blk_done_softirq+0x99/0xc0
>> [ 957.550669][ C39] __do_softirq+0xd3/0x45f
>> [ 957.550677][ C39] ? smpboot_thread_fn+0x2f/0x1e0
>> [ 957.550679][ C39] ? smpboot_thread_fn+0x74/0x1e0
>> [ 957.550680][ C39] ? smpboot_thread_fn+0x14e/0x1e0
>> [ 957.550684][ C39] run_ksoftirqd+0x30/0x60
>> [ 957.550687][ C39] smpboot_thread_fn+0x149/0x1e0
>> [ 957.886225][ C39] ? sort_range+0x20/0x20
>> [ 957.886226][ C39] kthread+0x137/0x160
>> [ 957.886228][ C39] ? kthread_park+0x90/0x90
>> [ 957.886231][ C39] ret_from_fork+0x22/0x30
>> [ 959.117120][ C39] ---[ end trace 3dacdac97e2ed164 ]---
>>
>> This is the procedure to reproduce the panic,
>> # modprobe scsi_debug delay=0 dev_size_mb=2048 max_queue=1
> Why do you need scsi_debug here, it's not relevant and not used?
If I don't config SCSI_DEBUG this panic cannot be triggered in my
environment, I don't know why. Maybe it is unnecessary, but in case
other people has similar configuration as mine, I add this command line
in the commit log.
>> # losetup -f /dev/nvme0n1 --direct-io=on
>> # blkdiscard /dev/loop0 -o 0 -l 0x200
>>
>> This patch fixes the issue by checking q->limits.discard_granularity in
>> __blkdev_issue_discard() before composing the discard bio. If the value
>> is 0, then prints a warning oops information and returns -EOPNOTSUPP to
>> the caller to indicate that this buggy device driver doesn't support
>> discard request.
> The patch itself looks correct to me.
>>
>> Fixes: 9b15d109a6b2 ("block: improve discard bio alignment in __blkdev_issue_discard()")
>> Fixes: c52abf563049 ("loop: Better discard support for block devices")
>> Reported-and-suggested-by: Ming Lei <ming.lei@xxxxxxxxxx>
>> Signed-off-by: Coly Li <colyli@xxxxxxx>
>> Reviewed-by: Ming Lei <ming.lei@xxxxxxxxxx>
>> Cc: Bart Van Assche <bvanassche@xxxxxxx>
>> Cc: Christoph Hellwig <hch@xxxxxx>
>> Cc: Enzo Matsumiya <ematsumiya@xxxxxxxx>
>> Cc: Evan Green <evgreen@xxxxxxxxxxxx>
>> Cc: Hannes Reinecke <hare@xxxxxxxx>
>> Cc: Jens Axboe <axboe@xxxxxxxxx>
>> Cc: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
>> Cc: Xiao Ni <xni@xxxxxxxxxx>
> Reviewed-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx>
[snipped]
Thanks.
Coly Li
