Re: [PATCH] block: tolerate 0 byte discard_granularity in __blkdev_issue_discard()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/08/2020 16:37, Johannes Thumshirn wrote:
> On 04/08/2020 16:34, Coly Li wrote:
>> On 2020/8/4 22:31, Johannes Thumshirn wrote:
>>> On 04/08/2020 16:23, Coly Li wrote:
>>>> This is the procedure to reproduce the panic,
>>>>   # modprobe scsi_debug delay=0 dev_size_mb=2048 max_queue=1
>>>>   # losetup -f /dev/nvme0n1 --direct-io=on
>>>>   # blkdiscard /dev/loop0 -o 0 -l 0x200
>>>
>>> losetup -f /dev/sdX isn't it?
>>>
>>
>> In my case, I use a NVMe SSD as the backing device of the loop device.
>> Because I don't have a scsi lun.
>>
>> And loading scsi_debug module seems necessary, otherwise the discard
>> process just hang and I cannot see the kernel panic (I don't know why yet).
> 
> OK, now that's highly interesting. Does it also happen if you back loop with
> a file? loop_config_discard() has different cases for the different backing devices/files. S
> 

Damn I didn't want to hit sent....

Does this (untested) change make a difference:

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 475e1a738560..8a07a89d702e 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -895,6 +895,9 @@ static void loop_config_discard(struct loop_device *lo)
                blk_queue_max_write_zeroes_sectors(q,
                        backingq->limits.max_write_zeroes_sectors);
 
+               q->limits.discard_granularity =
+                       backingq->limits.discard_granularity;
+
        /*
         * We use punch hole to reclaim the free space used by the
         * image a.k.a. discard. However we do not support discard if





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM Kernel]     [Linux Filesystem Development]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux