[RFC PATCH v2 4/4] block: set bi_size to REQ_OP_ZONE_RESET bio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now for zoned device, zone management ioctl commands are converted into
zone management bios and handled by blkdev_zone_mgmt(). There are 4 zone
management bios are handled, their op code is,
- REQ_OP_ZONE_RESET
  Reset the zone's writer pointer and empty all previously stored data.
- REQ_OP_ZONE_OPEN
  Open the zones in the specified sector range, no influence on data.
- REQ_OP_ZONE_CLOSE
  Close the zones in the specified sector range, no influence on data.
- REQ_OP_ZONE_FINISH
  Mark the zone as full, no influence on data.
All the zone management bios has 0 byte size, a.k.a their bi_size is 0.

Exept for REQ_OP_ZONE_RESET request, zero length bio works fine for
other zone management bio, before the zoned device e.g. host managed SMR
hard drive can be created as a bcache device.

When a bcache device (virtual block device to forward bios like md raid
drivers) can be created on top of the zoned device, and a fast SSD is
attached as a cache device, bcache driver may cache the frequent random
READ requests on fast SSD to accelerate hot data READ performance.

When bcache driver receives a zone management bio for REQ_OP_ZONE_RESET
op, while forwarding the request to underlying zoned device e.g. host
managed SMR hard drive, it should also invalidate all cached data from
SSD for the resetting zone. Otherwise bcache will continue provide the
outdated cached data to READ request and cause potential data storage
inconsistency and corruption.

In order to invalidate outdated data from SSD for the reset zone, bcache
needs to know not only the start LBA but also the range length of the
resetting zone. Otherwise, bcache won't be able to accurately invalidate
the outdated cached data.

Is it possible to simply set the bi_size inside bcache driver? The
answer is NO. Although every REQ_OP_ZONE_RESET bio has exact length as
zone size or q->limits.chunk_sectors, it is possible that some other
layer stacking block driver (in the future) exists between bcache driver
and blkdev_zone_mgmt() where the zone management bio is made.

The best location to set bi_size is where the zone management bio is
composed in blkdev_zone_mgmt(), then no matter how this bio is split
before bcache driver receives it, bcache driver can always correctly
invalidate the resetting range.

This patch sets the bi_size of REQ_OP_ZONE_RESET bio for each resetting
zone. Here REQ_OP_ZONE_RESET_ALL is special whose bi_size should be set
as capacity of whole drive size, then bcache can invalidate all cached
data from SSD for the zoned backing device.

With this change, now bcache code can handle REQ_OP_ZONE_RESET bio in
the way very similar to REQ_OP_DISCARD bio with very little change.

Signed-off-by: Coly Li <colyli@xxxxxxx>
Cc: Ajay Joshi <ajay.joshi@xxxxxxx>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Damien Le Moal <damien.lemoal@xxxxxxx>
Cc: Hannes Reinecke <hare@xxxxxxx>
Cc: Johannes Thumshirn <johannes.thumshirn@xxxxxxx>
Cc: Keith Busch <kbusch@xxxxxxxxxx>
---
Changelog:
v2: fix typo for REQ_OP_ZONE_RESET_ALL.
v1: initial version.

 block/blk-zoned.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 1e0708c68267..01d91314399b 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -227,11 +227,15 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 		if (op == REQ_OP_ZONE_RESET &&
 		    blkdev_allow_reset_all_zones(bdev, sector, nr_sectors)) {
 			bio->bi_opf = REQ_OP_ZONE_RESET_ALL;
+			bio->bi_iter.bi_sector = sector;
+			bio->bi_iter.bi_size = nr_sectors;
 			break;
 		}
 
 		bio->bi_opf = op | REQ_SYNC;
 		bio->bi_iter.bi_sector = sector;
+		if (op == REQ_OP_ZONE_RESET)
+			bio->bi_iter.bi_size = zone_sectors;
 		sector += zone_sectors;
 
 		/* This may take a while, so be nice to others */
-- 
2.25.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM Kernel]     [Linux Filesystem Development]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux