Re: Can't mount an encrypted backing device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 6, 2020 at 8:02 PM Eric Wheeler <bcache@xxxxxxxxxxxxxxxxxx> wrote:
>
> On Sun, 5 Jan 2020, Clodoaldo Neto wrote:
>
> > I'm struggling to mount an encrypted backing device. The backing
> > device is a RAID 1 array at /dev/md127 and the cache device is
> > /dev/sdb1.
> >
> > # lsblk
> > NAME                                          MAJ:MIN RM   SIZE RO
> > TYPE  MOUNTPOINT
> > sda                                             8:0    0 223.6G  0 disk
> > ├─sda1                                          8:1    0   700M  0 part  /boot
> > ├─sda2                                          8:2    0   700M  0
> > part  /boot/efi
> > ├─sda3                                          8:3    0    26G  0 part
> > │ └─luks-9793c78f-723c-4218-865f-83dbc4659192 253:1    0    26G  0 crypt [SWAP]
> > └─sda4                                          8:4    0   162G  0 part
> >   └─luks-569b1153-2fab-4984-b1b6-c4a02ee206ef 253:0    0   162G  0 crypt /
> > sdb                                             8:16   0 111.8G  0 disk
> > ├─sdb1                                          8:17   0    40G  0 part
> > └─sdb2                                          8:18   0  71.8G  0 part
> > sdc                                             8:32   0   1.8T  0 disk
> > └─sdc1                                          8:33   0   1.8T  0 part
> >   └─md127                                       9:127  0   1.8T  0 raid1
> > sdd                                             8:48   0   1.8T  0 disk
> > └─sdd1                                          8:49   0   1.8T  0 part
> >   └─md127                                       9:127  0   1.8T  0 raid1
> > sde                                             8:64   1  58.9G  0 disk
> > ├─sde1                                          8:65   1    20G  0 part
> > └─sde2                                          8:66   1  38.9G  0 part
> > sr0                                            11:0    1  1024M  0 rom
> >
> > # blkid | grep -E "md127|sdb1"
> > /dev/sdb1: UUID="535bfa2d-4c6e-4c19-91b2-d292872a1877" TYPE="bcache"
> > PARTLABEL="Linux filesystem"
> > PARTUUID="505789f1-0523-4c62-bdb1-81bc0cc7bff1"
> > /dev/md127: UUID="b17ceaac-27ec-44d8-8bbb-235cfaa0c4a4" TYPE="bcache"
> >
> > It was working right when I installed Fedora 31 yesterday but then I
> > resized the caching partition and I can't make it work again.
> >
> > This is what I tried
> >
> > # wipefs -a /dev/sdb1
> > /dev/sdb1: 16 bytes were erased at offset 0x00001018 (bcache): c6 85
> > 73 f6 4e 1a 45 ca 82 65 f5 7f 48 ba 6d 81
> >
> > # make-bcache -C --writeback /dev/sdb1
> > UUID:                   eb7d8e72-f24c-48ee-bad0-771afccca876
> > Set UUID:               50e33260-4623-4374-9a61-c78b7d75280e
> > version:                0
> > nbuckets:               81920
> > block_size:             1
> > bucket_size:            1024
> > nr_in_set:              1
> > nr_this_dev:            0
> > first_bucket:           1
> >
> > # ll /sys/fs/bcache/
> > total 0
> > drwxr-xr-x. 7 root root    0 Jan  5 18:34 50e33260-4623-4374-9a61-c78b7d75280e
> > --w-------. 1 root root 4096 Jan  5 17:39 pendings_cleanup
> > --w-------. 1 root root 4096 Jan  5 18:03 register
> > --w-------. 1 root root 4096 Jan  5 17:39 register_quiet
> >
> > # bcache-super-show /dev/sdb1
> > sb.magic                ok
> > sb.first_sector         8 [match]
> > sb.csum                 C4CB62916B7825CE [match]
> > sb.version              3 [cache device]
> >
> > dev.label               (empty)
> > dev.uuid                eb7d8e72-f24c-48ee-bad0-771afccca876
> > dev.sectors_per_block   1
> > dev.sectors_per_bucket  1024
> > dev.cache.first_sector  1024
> > dev.cache.cache_sectors 83885056
> > dev.cache.total_sectors 83886080
> > dev.cache.ordered       yes
> > dev.cache.discard       no
> > dev.cache.pos           0
> > dev.cache.replacement   0 [lru]
> >
> > cset.uuid               50e33260-4623-4374-9a61-c78b7d75280e
> >
> > # echo /dev/md127 > /sys/fs/bcache/register
> > # echo 50e33260-4623-4374-9a61-c78b7d75280e > /sys/block/md127/bcache/attach
> > # blkid | grep bcache0
> > /dev/bcache0: UUID="7e2c0b40-8dec-4b13-8d00-b53b55160775" TYPE="crypto_LUKS"
> >
> > # bcache-status
> > --- bcache ---
> > UUID                        50e33260-4623-4374-9a61-c78b7d75280e
> > Block Size                  512 B
> > Bucket Size                 512.00 KiB
> > Congested?                  False
> > Read Congestion             2.0ms
> > Write Congestion            20.0ms
> > Total Cache Size            40 GiB
> > Total Cache Used            409.6 MiB   (1%)
> > Total Cache Unused          40 GiB      (99%)
> > Evictable Cache             40 GiB      (100%)
> > Replacement Policy          [lru] fifo random
> > Cache Mode                  writethrough [writeback] writearound none
> > Total Hits                  9   (64%)
> > Total Misses                5
> > Total Bypass Hits           13  (16%)
> > Total Bypass Misses         64
> > Total Bypassed              308.00 KiB
> >
> > # lsblk
> > NAME                                          MAJ:MIN RM   SIZE RO
> > TYPE  MOUNTPOINT
> > sda                                             8:0    0 223.6G  0 disk
> > ├─sda1                                          8:1    0   700M  0 part  /boot
> > ├─sda2                                          8:2    0   700M  0
> > part  /boot/efi
> > ├─sda3                                          8:3    0    26G  0 part
> > │ └─luks-9793c78f-723c-4218-865f-83dbc4659192 253:1    0    26G  0 crypt [SWAP]
> > └─sda4                                          8:4    0   162G  0 part
> >   └─luks-569b1153-2fab-4984-b1b6-c4a02ee206ef 253:0    0   162G  0 crypt /
> > sdb                                             8:16   0 111.8G  0 disk
> > ├─sdb1                                          8:17   0    40G  0 part
> > │ └─bcache0                                   252:0    0   1.8T  0 disk
> > └─sdb2                                          8:18   0  71.8G  0 part
> > sdc                                             8:32   0   1.8T  0 disk
> > └─sdc1                                          8:33   0   1.8T  0 part
> >   └─md127                                       9:127  0   1.8T  0 raid1
> >     └─bcache0                                 252:0    0   1.8T  0 disk
> > sdd                                             8:48   0   1.8T  0 disk
> > └─sdd1                                          8:49   0   1.8T  0 part
> >   └─md127                                       9:127  0   1.8T  0 raid1
> >     └─bcache0                                 252:0    0   1.8T  0 disk
> > sde                                             8:64   1  58.9G  0 disk
> > ├─sde1                                          8:65   1    20G  0 part
> > └─sde2                                          8:66   1  38.9G  0 part
> > sr0                                            11:0    1  1024M  0 rom
> >
> > # mount /dev/bcache0 /r
> > mount: /r: unknown filesystem type 'crypto_LUKS'.
> >
> > # cryptsetup open /dev/bcache0 backing-device
> > Enter passphrase for /dev/bcache0:
> >
> > # mount /dev/mapper/backing-device /r
> > mount: /r: unknown filesystem type 'bcache'.
>
> I'm guessing that make-bcache was run upon /dev/mapper/backing-device at
> some point in time. Hopefully it wasn't clobbered.
>
I guess you are right because /dev/mapper/backing-device is seen as a
cache device:

# bcache-super-show /dev/mapper/backing-device
sb.magic                ok
sb.first_sector         8 [match]
sb.csum                 D9C2336DD00A6E69 [match]
sb.version              3 [cache device]

dev.label               (empty)
dev.uuid                8022eea3-fcf0-40b8-850a-31e5f841d0bd
dev.sectors_per_block   1
dev.sectors_per_bucket  1024
dev.cache.first_sector  1024
dev.cache.cache_sectors 3774576640
dev.cache.total_sectors 3774577664
dev.cache.ordered       yes
dev.cache.discard       no
dev.cache.pos           0
dev.cache.replacement   0 [lru]

cset.uuid               4a63d2b5-1568-473d-925d-53306af2ba7c

Is there a path to revert it? Like just formatting it to ext4?

> Try
>
> mount -t ext2 /dev/mapper/backing-device /r
>          ^^^^ or whatever your original FS really was.
>
# mount /dev/mapper/backing-device /r
mount: /r: unknown filesystem type 'bcache'.
> --
> Eric Wheeler
>
>
> >
> > What am I missing?
> >
> > Regards, Clodoaldo
> >




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM Kernel]     [Linux Filesystem Development]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux