[PATCH 11/19] bcache: use sysfs_strtoul_bool() to set bit-field variables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When setting bcache parameters via sysfs, there are some variables are
defined as bit-field value. Current bcache code in sysfs.c uses either
d_strtoul() or sysfs_strtoul() to convert the input string to unsigned
integer value and set it to the corresponded bit-field value.

The problem is, the bit-field value only takes the lowest bit of the
converted value. If input is 2, the expected value (like bool value)
of the bit-field value should be 1, but indeed it is 0.

The following sysfs files for bit-field variables have such problem,
	bypass_torture_test,	for dc->bypass_torture_test
	writeback_metadata,	for dc->writeback_metadata
	writeback_running,	for dc->writeback_running
	verify,			for c->verify
	key_merging_disabled,	for c->key_merging_disabled
	gc_always_rewrite,	for c->gc_always_rewrite
	btree_shrinker_disabled,for c->shrinker_disabled
	copy_gc_enabled,	for c->copy_gc_enabled

This patch uses sysfs_strtoul_bool() to set such bit-field variables,
then if the converted value is non-zero, the bit-field variables will
be set to 1, like setting a bool value like expensive_debug_checks.

Signed-off-by: Coly Li <colyli@xxxxxxx>
---
 drivers/md/bcache/sysfs.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 96b64893f2cb..57395e23747a 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -277,9 +277,9 @@ STORE(__cached_dev)
 
 	sysfs_strtoul(data_csum,	dc->disk.data_csum);
 	d_strtoul(verify);
-	d_strtoul(bypass_torture_test);
-	d_strtoul(writeback_metadata);
-	d_strtoul(writeback_running);
+	sysfs_strtoul_bool(bypass_torture_test, dc->bypass_torture_test);
+	sysfs_strtoul_bool(writeback_metadata, dc->writeback_metadata);
+	sysfs_strtoul_bool(writeback_running, dc->writeback_running);
 	d_strtoul(writeback_delay);
 
 	sysfs_strtoul_clamp(writeback_percent, dc->writeback_percent,
@@ -816,12 +816,12 @@ STORE(__bch_cache_set)
 	}
 
 	sysfs_strtoul(journal_delay_ms,		c->journal_delay_ms);
-	sysfs_strtoul(verify,			c->verify);
-	sysfs_strtoul(key_merging_disabled,	c->key_merging_disabled);
+	sysfs_strtoul_bool(verify,		c->verify);
+	sysfs_strtoul_bool(key_merging_disabled, c->key_merging_disabled);
 	sysfs_strtoul(expensive_debug_checks,	c->expensive_debug_checks);
-	sysfs_strtoul(gc_always_rewrite,	c->gc_always_rewrite);
-	sysfs_strtoul(btree_shrinker_disabled,	c->shrinker_disabled);
-	sysfs_strtoul(copy_gc_enabled,		c->copy_gc_enabled);
+	sysfs_strtoul_bool(gc_always_rewrite,	c->gc_always_rewrite);
+	sysfs_strtoul_bool(btree_shrinker_disabled, c->shrinker_disabled);
+	sysfs_strtoul_bool(copy_gc_enabled,	c->copy_gc_enabled);
 	/*
 	 * write gc_after_writeback here may overwrite an already set
 	 * BCH_DO_AUTO_GC, it doesn't matter because this flag will be
-- 
2.16.4




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM Kernel]     [Linux Filesystem Development]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux