On 21/11/2017 6:57 PM, Kent Overstreet wrote:
> On Tue, Nov 21, 2017 at 06:50:32PM +0800, tang.junhui@xxxxxxxxxx wrote:
>> From: Tang Junhui <tang.junhui@xxxxxxxxxx>
>>
>> Currently in pick_data_bucket(), though we keep multiple buckets open
>> for writes, and try to segregate different write streams for better
>> cache utilization: first we look for a bucket where the last write to
>> it was sequential with the current write, and failing that we look
>> for a bucket that was last usedby the same task.
>>
>> But actually, in such scenario that there are some flash devices
>> , and some backend bcache devices, when many tasks request these
>> flash devices and backend bcache devices, the write IOs may still
>> fall to the same bucket as bellow bucket:
>> | bcache data | flash data | bcache data | bcache data| flash data|
>> then after writeback of these backend bcache devices, the bucket would
>> be like bellow bucket:
>> | free | flash data | free | free | flash data |
>
> This patch doesn't make any sense - open_buckets are only for allocations and
> writes to the SSD.
>
Hi Kent,
I feel the purpose for this patch is to make flash only volume occupy as
less buckets as possible. Because dirty sectors of flash only volume is
not reclaimable, if their dirty sectors mixed with dirty sectors of
cached device, such buckets will be marked as dirty and won't be reclaimed.
I don't check the patch very carefully so far, just want to explain what
problem that this patch wants to address, as my understand.
Junhui,
Correct me if I am wrong. I guess the reason why you care about flash
only volume is because ceph users use flash only volume to store some
metadata only on SSD ?
Thanks.
Coly Li
>>
>> So, there are many free space in this bucket, but since flash data
>> still exists, so this bucket cannot reused, which would cause waste of
>> bucket space.
>>
>> In this patch, we add a separate open bucket list for flash devices,
>> and write all flash data to these buckets, so data from flash devices
>> and backend bcache devices can store in different buckets.
>>
>> Signed-off-by: Tang Junhui <tang.junhui@xxxxxxxxxx>
>> ---
>> drivers/md/bcache/alloc.c | 40 +++++++++++++++++++++++++++++++---------
>> drivers/md/bcache/bcache.h | 1 +
>> drivers/md/bcache/super.c | 1 +
>> 3 files changed, 33 insertions(+), 9 deletions(-)
>> mode change 100644 => 100755 drivers/md/bcache/alloc.c
>> mode change 100644 => 100755 drivers/md/bcache/bcache.h
>> mode change 100644 => 100755 drivers/md/bcache/super.c
>>
>> diff --git a/drivers/md/bcache/alloc.c b/drivers/md/bcache/alloc.c
>> old mode 100644
>> new mode 100755
>> index 0803563..add00a3
>> --- a/drivers/md/bcache/alloc.c
>> +++ b/drivers/md/bcache/alloc.c
>> @@ -69,7 +69,8 @@
>> #include <linux/random.h>
>> #include <trace/events/bcache.h>
>>
>> -#define MAX_OPEN_BUCKETS 128
>> +#define MAX_OPEN_DATA_BUCKETS 96
>> +#define MAX_OPEN_FLASH_BUCKETS 32
>>
>> /* Bucket heap / gen */
>>
>> @@ -532,19 +533,19 @@ struct open_bucket {
>> * should be a sane heuristic.
>> */
>> static struct open_bucket *pick_data_bucket(struct cache_set *c,
>> + struct list_head *open_buckets,
>> const struct bkey *search,
>> unsigned write_point,
>> struct bkey *alloc)
>> {
>> struct open_bucket *ret, *ret_task = NULL;
>>
>> - list_for_each_entry_reverse(ret, &c->data_buckets, list)
>> + list_for_each_entry_reverse(ret, open_buckets, list)
>> if (!bkey_cmp(&ret->key, search))
>> goto found;
>> else if (ret->last_write_point == write_point)
>> ret_task = ret;
>> -
>> - ret = ret_task ?: list_first_entry(&c->data_buckets,
>> + ret = ret_task ?: list_first_entry(open_buckets,
>> struct open_bucket, list);
>> found:
>> if (!ret->sectors_free && KEY_PTRS(alloc)) {
>> @@ -575,7 +576,7 @@ bool bch_alloc_sectors(struct cache_set *c, struct bkey *k, unsigned sectors,
>> struct open_bucket *b;
>> BKEY_PADDED(key) alloc;
>> unsigned i;
>> -
>> + struct list_head *open_buckets;
>> /*
>> * We might have to allocate a new bucket, which we can't do with a
>> * spinlock held. So if we have to allocate, we drop the lock, allocate
>> @@ -586,7 +587,9 @@ bool bch_alloc_sectors(struct cache_set *c, struct bkey *k, unsigned sectors,
>> bkey_init(&alloc.key);
>> spin_lock(&c->data_bucket_lock);
>>
>> - while (!(b = pick_data_bucket(c, k, write_point, &alloc.key))) {
>> + open_buckets = UUID_FLASH_ONLY(&c->uuids[KEY_INODE(k)]) ? &c->flash_buckets : &c->data_buckets;
>> +
>> + while (!(b = pick_data_bucket(c, open_buckets, k, write_point, &alloc.key))) {
>> unsigned watermark = write_prio
>> ? RESERVE_MOVINGGC
>> : RESERVE_NONE;
>> @@ -625,7 +628,8 @@ bool bch_alloc_sectors(struct cache_set *c, struct bkey *k, unsigned sectors,
>> * Move b to the end of the lru, and keep track of what this bucket was
>> * last used for:
>> */
>> - list_move_tail(&b->list, &c->data_buckets);
>> + list_move_tail(&b->list, open_buckets);
>> +
>> bkey_copy_key(&b->key, k);
>> b->last_write_point = write_point;
>>
>> @@ -666,22 +670,40 @@ void bch_open_buckets_free(struct cache_set *c)
>> list_del(&b->list);
>> kfree(b);
>> }
>> +
>> + while (!list_empty(&c->flash_buckets)) {
>> + b = list_first_entry(&c->flash_buckets,
>> + struct open_bucket, list);
>> + list_del(&b->list);
>> + kfree(b);
>> + }
>> +
>> }
>>
>> int bch_open_buckets_alloc(struct cache_set *c)
>> {
>> int i;
>> + struct open_bucket *b;
>>
>> spin_lock_init(&c->data_bucket_lock);
>>
>> - for (i = 0; i < MAX_OPEN_BUCKETS; i++) {
>> - struct open_bucket *b = kzalloc(sizeof(*b), GFP_KERNEL);
>> + for (i = 0; i < MAX_OPEN_DATA_BUCKETS; i++) {
>> + b = kzalloc(sizeof(*b), GFP_KERNEL);
>> if (!b)
>> return -ENOMEM;
>>
>> list_add(&b->list, &c->data_buckets);
>> }
>>
>> + for (i = 0; i < MAX_OPEN_FLASH_BUCKETS; i++) {
>> + b = kzalloc(sizeof(*b), GFP_KERNEL);
>> + if (!b)
>> + return -ENOMEM;
>> +
>> + list_add(&b->list, &c->flash_buckets);
>> + }
>> +
>> +
>> return 0;
>> }
>>
>> diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
>> old mode 100644
>> new mode 100755
>> index abd31e8..0233548
>> --- a/drivers/md/bcache/bcache.h
>> +++ b/drivers/md/bcache/bcache.h
>> @@ -627,6 +627,7 @@ struct cache_set {
>>
>> /* List of buckets we're currently writing data to */
>> struct list_head data_buckets;
>> + struct list_head flash_buckets;
>> spinlock_t data_bucket_lock;
>>
>> struct journal journal;
>> diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
>> old mode 100644
>> new mode 100755
>> index fc0a31b..af64b8c
>> --- a/drivers/md/bcache/super.c
>> +++ b/drivers/md/bcache/super.c
>> @@ -1505,6 +1505,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
>> INIT_LIST_HEAD(&c->btree_cache_freeable);
>> INIT_LIST_HEAD(&c->btree_cache_freed);
>> INIT_LIST_HEAD(&c->data_buckets);
>> + INIT_LIST_HEAD(&c->flash_buckets);
>>
>> c->search = mempool_create_slab_pool(32, bch_search_cache);
>> if (!c->search)
>> --
>> 1.8.3.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
