Hello Kent,
I have setup bcache and run fio data verification test on write back and write through caches.
The fio tests are passed, however I have found following issues while using bcache.
Issue1: Cache is not created as per user specified options
--------------------------------------------------------------------------------------------------------
Steps:
1.Create cache by specifying mode writeback and cache replacement policy as fifo
[root@annu bcache]# make-bcache --cache /dev/sdc --bdev /dev/sdd --writeback --cache_replacement_policy=fifo
UUID: e25f2840-f02b-46af-81e7-28948b2737cc
Set UUID: 68da5b89-1e87-457a-80c7-2c822737f969
nbuckets: 2048
block_size: 1
bucket_size: 1024
nr_in_set: 1
nr_this_dev: 0
first_bucket: 1
UUID: a3ce52e6-631b-4c74-afa2-9f8b0088c7f4
Set UUID: 68da5b89-1e87-457a-80c7-2c822737f969
nbuckets: 20480
block_size: 1
bucket_size: 1024
nr_in_set: 1
nr_this_dev: 0
first_bucket: 1
[root@annu bcache]# echo /dev/sdc > /sys/fs/bcache/register
[root@annu bcache]# echo /dev/sdd > /sys/fs/bcache/register
2. Cache mode should be "writeback" instead of "writethrough"
[root@annu bcache]# cat /sys/block/bcache2/bcache/cache_mode
[writethrough] writeback writearound none
[root@annu bcache]# cat /sys/block/bcache2/bcache/writeback_running
1
3. Cache policy should be "fifo" instead of "lru"
[root@annu ~]# cat /sys/block/bcache2/bcache/cache/cache0/cache_replacement_policy
[lru] fifo random
Issue2: Cache dirty data value should not be negative.
-------------------------------------------------------------------------------------------------------
Steps:
1.Create cache by specifying mode writeback and cache replacement policy as fifo
2.To make bcache devices known to the kernel
[root@annu bcache]# echo /dev/sdc > /sys/fs/bcache/register
[root@annu bcache]# echo /dev/sdd > /sys/fs/bcache/register
3.Create FS on cache /dev/bcacheN and mount in directory
4.Create Data set by using fio or dd on mount point.
5. Change cache node from "writethrough" to "writeback"
[root@annu ~]# echo writeback > /sys/block/bcache2/bcache/cache_mode
[root@annu ~]# cat /sys/block/bcache2/bcache/cache_mode
writethrough [writeback] writearound none
6.Check cache dirty data should not be negative value
[root@annu ~]# cat /sys/block/bcache2/bcache/dirty_data
-9.4M
--
Thanks & Regards
Nitin Kshirsagar
Software Engr, QA
Cell 997.566.3985
STEC india private Limited, Pune | The SSD Company TM
NASDAQ STEC • Web www.stec-inc.com
PROPRIETARY-CONFIDENTIAL INFORMATION INCLUDED
This electronic transmission, and any documents attached hereto, may contain confidential, proprietary and/or legally privileged information. The information is intended only for use by the recipient named above. If you received this electronic message in error, please notify the sender and delete the electronic message. Any disclosure, copying, distribution, or use of the contents of information received in error is strictly prohibited, and violators will be pursued legally.
--
To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
