Oh, sorry I misunderstood. You have to run make-bcache once to add a bcache superblock to the drive. After that the drive contents are destroyed and it needs to be formatted with a filesystem. At that point you can attach or detach the drive while it is in use. On Wed, Feb 1, 2012 at 12:54 PM, Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx> wrote: > > Hi Adam, > > thanks for the answer, see below. > > On Wed, Feb 01, 2012 at 11:04:59AM -0800, Adam Berkan wrote: > > You can attach bcache to a drive with an existing file system, and it will > > continue as normal. If you connect to a drive without a file system, then > > it will continue to not have a file system, but you can format it while > > attached. > > Maybe I misused the term "format". > > I did not mean filesystem format, but bcache format. > > What I understood, maybe I'm wrong, is that the backing > device, before being used, must be "initialized" with > the bcache tool. > > From the docs: > > Getting started: > You'll need make-bcache from the bcache-tools repository. Both the cache device > and backing device must be formatted before use. > make-bcache -B /dev/sdb > make-bcache -C -w2k -b1M -j64 /dev/sdc > > I understand this as the backing device gets something > on written on it (note the term "formatted"). > > Am I wrong? I hope so... > > Thanks again, > > bye, > > pg > > > Attach/detach should work while the device is in use. This isn't the most > > tested code path, especially with writeback on, but it's supposed to work. > > Detaching while the cache is dirty requires flushing all that data so > > performance will be bad until the detach completes. > > > > Let us know if you find any bugs. > > Adam > > > > On Wed, Feb 1, 2012 at 2:10 AM, Piergiorgio Sartor < > > piergiorgio.sartor@xxxxxxxx> wrote: > > > > > Hi all, > > > > > > first of all I would like to congratulate for this > > > project, I think it is one of the most promising > > > feature the Linux kernel can have. > > > > > > Wrote that, I've a question about the concept of > > > formatting the backing device. > > > > > > As far as I understood, the first concept of bcache > > > was to simply "register" or "attach" a cache to a > > > backing device, that is, the backing device had not > > > to be formatted. > > > > > > Lately, still if I understood it correctly, this > > > behaviour was changed and, now, the backing device > > > needs to be formatted. > > > > > > So, the question is: > > > > > > How about an already running device? Is it still > > > possible to attach a cache under such situation? > > > > > > In general, would it be possible to attach/detach > > > a cache to any already available device (in the > > > future)? Or the caching/backing setup must be planned > > > before the HW is available, so to speak? > > > > > > It would be useful (and cool too), to have the > > > possibility to attach/detach the SSD cache, on > > > the fly (at run-time) to any device it needs it. > > > > > > I hope the question(s) are clear, if not please > > > let me know. > > > > > > Thanks a lot in advance, > > > > > > bye, > > > > > > -- > > > > > > piergiorgio > > > -- > > > To unsubscribe from this list: send the line "unsubscribe linux-bcache" in > > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > > -- > > piergiorgio -- To unsubscribe from this list: send the line "unsubscribe linux-bcache" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
