On Sat, Aug 02, 2014 at 11:40:48PM -0700, Len Ovens wrote: > So, after you have jack running try running: > zita-a2j -d hw:0,1 -r 48000 -p 256 -n2 -c 2 > This assumes your USBDualTubePre is set to 48000... and you have set > Jack that way too :) Change the 48000 to 44100 otherwise. This would > show up in qjackctl as zita-a2j capture_1 and 2 (does here) Just use zita-a2j -j spdif -d hw:0,1 -r 48000 -p 256 -n2 -c 2 to get correct port names. > if you don't have zita-a2j (you should download it) you can test > with alsa_in instead. Wouldn't recommend that, and zita-a2j is included as an internal client with recent Jack1 releases anyway. It can even be started in one command together with Jack. > The -p value (with zita-a2j) can be one step less than you have jack > set (I may get corrected :) and -n should be the same. There are no such restrictions. Ciao, -- FA A world of exhaustive, reliable metadata would be an utopia. It's also a pipe-dream, founded on self-delusion, nerd hubris and hysterically inflated market opportunities. (Cory Doctorow) _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
