I seem to have gotten an itch to make some control surfaces for my home
recording system.
The first thing I find is that hardware is expensive and software is cheap
(money wise, time is something else). Fewer pots and switches costs less
and so they need to be multi-functional. This means momentary switches
with coloured lights in them, rotary encoders, and motorized faders.
So, how about a touch surface? 7inch android things don't cost much and
have wireless and stuff... and play games when we are bored ;) with a
touch surface you have to watch what you are doing all the time, real
knobs and sliders let you feel.
digital mixers use a mix of things... but no mouse that I have seen.
Generally at least one touch screen though. It is used for all the stuff
that is hard to use controls for. But also for remote control. The diy
sites show the rotary encoders with light strips to show position, but I
don't see this on the mixers... they give feedback through the touch
screen instead. The encoder is $2, the light strip is $15. I am not sure
what the interface is like, but it would seem simpler than a pot.
Encoders are fine for starting from where I am and moving, but for some
things a fader is still needed. If it is going to be used for more than
one thing, it needs to be motorized. This doesn't seem too bad at $20 for
the fader/motor combination.... but the support stuff has to be there too.
It needs a motor driver, encoder and (so they say) touch sensing so the
motor won't fight against your finger.
There seem to be "brains" out there with switch and analog inputs with USB
or midi ports. (and led outputs) Ya the stuff is all there.
Some other ideas: for faders on a touch pad (screen or drawing pad or
whatever) The point where the fader is right now does not matter, only
that it can be moved in the right direction without jumping to whereever
the finger first touches, tactile feel could be added plastic template
that has slots where the faders are supposed to be. This would be cheap to
try (compared to building just about anything) and I have wanted a drawing
tablet to try other things anyway.
For switches the keyboard has got to be the cheapest thing... only one
thing is focus changes. Linux is very nice in recognizing and using new
USB things. If I plug in a second keyboard, I now have two keyboards that
do the same thing (mice work this way too). I want to use the second
keyboard as direct input for my own program that takes key presses in and
puts midi messages out to a jack port. In fact it may be an interesting
tool to make a keyboard driver that uses one key to switch modes between
midi mode and keyboard mode on the main keyboard even. (that strange flag
key for example)
Anyway, is there an easy way to grab a keyboard device before the system
does? This looks to be /dev/input/event7. There is a utility called actkbd
that reads this. And I guess it can run a script for any one key or just
output to stdout the key press. Anyone have a better idea?
--
Len Ovens
www.ovenwerks.net
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
