Re: MIDI hardware with Linux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22 April 2014 at 21:23, Simon Wise <simonzwise@xxxxxxxxx> wrote:

> There are several ways you can configure the BFC2000 midi
> ports, for different use cases. Configuring the BFCs requires
> close reading of the manual, it isn't 'discoverable' by trial
> and error! They can be set as proper USB midi ports.

Simon's reply was exactly right.

I found a "User's Manual" with title "B-CONTROL > Fader BCF2000
B-CONTROL > Rotary BCR2000" on line as a file named bcf2000_p0246_m_en.pdf
In that I discovered how to set my BCF2000 to function as a UCB<>MIDI
interface.

First I had to set my BCF back from LC (Logic Control) mode to bC 
(B-CONTROL) mode.  Here are the steps:

- power off the BCF, if not already off
- hold down the button just under the leftmost rotary knob
- turn on the power
- after the software version number displays, notice the mode is "bC"
- release the button

The BCF2000 can now be programmed into USB MIDI mode U-3.  Here are 
the steps:

- hold down the EDIT key
- press the STORE key
- release both keys
- rotate the leftmost knob until "U-3" displays
- press the EXIT key

Now the BCF2000 functions as a single USB<>MIDI interface.

amidi -l reports

Dir Device    Name
IO  hw:1,0    M Audio Delta 1010 MIDI
IO  hw:3,0,0  BCF2000 MIDI 1
IO  hw:3,0,1  BCF2000 MIDI 2
 O  hw:3,0,2  BCF2000 MIDI 3

Relevant programs I'm running are:

 1259 ?        SLl    0:01 /usr/bin/qjackctl
 1266 ?        SLl    0:05 /opt/Ardour_x86_64-3.5.357-dbg/bin/ardour-3.5.357
24167 ?        SLsl   0:10 /bin/jackd -dalsa -r48000 -p1024 -n2 -D -Chw:1 -Phw:1
24180 ?        SLl    0:02 a2jmidid -e

In Qjackctl's Connections window, on the MIDI tab, I've connected

  ardour (mackie control out) <> a2j (BCF2000 MIDI 3)
  ardour (mackie control in)  <> a2j (BCF2000 MIDI 2)

Now my Mackie Control Universal surface controls ardour and changes 
in ardour's GUI are reflected on the MCU.  Sliders work, the jog 
wheel works, the clocks stay in sync, transport controls work.  
Basically, it all seems fine.

Thanks to all for the help!!!


--
Kevin


_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user




[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux