David Santamauro <david.santamauro@xxxxxxxxx> wrote: > >.. answering myself ... > >On 12/28/2013 10:26 AM, David Santamauro wrote: > >> Then I started the slave (same command line) and noticed massive >xruns >> (on the slave) -- so ... I change it all back to -p 256 but the xruns >> are still present (on the slave). >> >> Poking around a bit, I opened up the "options" on the master and it >says >> Frames/Period: 256, I open up options on the slave, and it is grayed >out >> but says: Frames/Period: 512. >> >> My questions are simply: >> >> 1) is qjackctl reporting this correctly on the slave? > >No, qjackctl is displaying some old values, opening up the Messages >window -> Status tab shows the correct value (256) > >> 3) is this why I'm seeing massive xruns? > >nope ... while looking at the Status tab I noticed DSP load was between > >95% and 100%. I found the offending windows program and all is well >again Out of curiosity what software are you running on each OS? Rob _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
