Hi list,
I recently bought a focusrite Scarlett 2i2.
I already had a look at
http://linuxmusicians.com/viewtopic.php?f=27&t=10055&start=30
and first asked there, without success.
So I am reposting it here, with hope that someone has ideas how to
get it running.
Capturing works out of the box. But I did not get the playback
running.
Here my Systeminfo:
uname -a
Linux workstation 3.9.0-030900rc8-generic #201304211835 SMP Sun
Apr 21 22:35:53 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
lsmod | grep snd_usb_audio
snd_usb_audio 147350 2
snd_usbmidi_lib 29477 1 snd_usb_audio
snd_hwdep 13613 2 snd_hda_codec,snd_usb_audio
snd_pcm 102477 7
snd_hda_codec_hdmi,snd_ice1712,snd_hda_intel,snd_ac97_codec,snd_hda_codec,snd_usb_audio,snd_rme96
snd 69533 41
snd_hda_codec_hdmi,snd_ice1712,snd_hda_codec_via,snd_ak4xxx_adda,snd_cs8427,snd_hda_intel,snd_ac97_codec,snd_hda_codec,snd_usb_audio,snd_rme96,snd_usbmidi_lib,snd_i2c,snd_hwdep,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
lsusb
Bus 002 Device 002: ID 1235:8006 Novation EMS
nano /etc/modprobe.d/focusrite-scarlett
options snd_usb_audio vid=0x1235 pid=0x8006 device_setup=0xf
index=4 enable=1
aplay -l && arecord -l
**** List of PLAYBACK Hardware Devices ****
card 0: PAD [RME Digi96/8 PAD], device 0: Digi96 IEC958 [Digi96
IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PAD [RME Digi96/8 PAD], device 1: Digi96 ADAT [Digi96
ADAT]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: VT2020 Analog [VT2020 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 2: VT2020 Alt Analog [VT2020 Alt
Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 3: VT2020 Digital [VT2020 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: M1010LT [M Audio Delta 1010LT], device 0: ICE1712 multi
[ICE1712 multi]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 4: USB [Scarlett 2i2 USB], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
**** List of CAPTURE Hardware Devices ****
card 0: PAD [RME Digi96/8 PAD], device 0: Digi96 IEC958 [Digi96
IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PAD [RME Digi96/8 PAD], device 1: Digi96 ADAT [Digi96
ADAT]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: VT2020 Analog [VT2020 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 2: VT2020 Alt Analog [VT2020 Alt
Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: M1010LT [M Audio Delta 1010LT], device 0: ICE1712 multi
[ICE1712 multi]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 4: USB [Scarlett 2i2 USB], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
jack only runs at 48kHz with 512 Frames and higher.
Non realtime, no memory restriction, Duplex
I tested the playback with Pulseaudio and Jack, neighter worked.
Does anyone have a clue, what I am missing?
Regards
Ck
|
