Not sure how to do that... am I wrong in assuming that the endpoint values I
need are in the output of lsusb -v?
This is where it stands right now... the capture part is working fine with
the addition of the specific endpoint address, playback either crashes JACK
or hard freezes the R16.
{
.ifnum = 4,
.type = QUIRK_AUDIO_FIXED_ENDPOINT,
.data = & (const struct audioformat) {
.formats = SNDRV_PCM_FMTBIT_S24_LE,
.channels = 8,
.iface = 1,
.altsetting = 1,
.altset_idx = 1,
.attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
.endpoint = 0x84, /*CAPTURE*/
.ep_attr = 13,
.rates = SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 44100,
.rate_max = 96000,
.nr_rates = 4,
.rate_table = (unsigned int[]) {
44100, 48000, 88200, 96000
}
}
},
{
.ifnum = 5,
.type = QUIRK_AUDIO_FIXED_ENDPOINT,
.data = & (const struct audioformat) {
.formats = SNDRV_PCM_FMTBIT_S24_LE,
.channels = 2,
.iface = 1,
.altsetting = 1,
.altset_idx = 1,
.attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
.endpoint = 0x03, /*PLAYBACK*/
.ep_attr = 9,
.rates = SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 44100,
.rate_max = 96000,
.nr_rates = 4,
.rate_table = (unsigned int[]) {
44100, 48000, 88200, 96000
}
}
},
--
View this message in context: http://linux-audio.4202.n7.nabble.com/re-Zoom-R16-tp87487p87973.html
Sent from the linux-audio-user mailing list archive at Nabble.com.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
