On 09/19/2013 02:46 AM, Clemens Ladisch wrote:
Erik Steffl wrote:
aplay -l
card 2: BR80AUDIO [BR-80(AUDIO)], device 0: USB Audio [USB Audio]
Boss Micro BR-80 seems to be recognized properly but qjackctl does not
list it in Set under any of Interface, Input Device, Output Device
choices, I only see /dev/dsp, /dev/audio, plughw:0 and hw:0.
"hw:2" should appear in those lists. Did you start QjackCtl before
plugging the device in? Can you start Jack manually with
"jackd -d alsa -d hw:2"?
started qjackctl after the device was plugged in,
starting jack manually seems to be working (also tested wiuth
ardour2, both recording and playback works).
Does that mean there is a bug in qjackctl? Using the version in
Ubuntu 13.04 which is qjackctl 0.3.9-2
Here's what jackd prints out when started manually:
erik@jojda:~$ jackd -d alsa -d hw:2
jackdmp 1.9.10
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2013 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
no message buffer overruns
no message buffer overruns
no message buffer overruns
JACK server starting in realtime mode with priority 10
audio_reservation_init
Acquire audio card Audio2
creating alsa driver ... hw:2|hw:2|1024|2|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
thanks!
erik
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
