On Thu, 2013-09-12 at 12:31 -0700, Len Ovens wrote: > there are also some stereo preamps where the "loudness" if turned on > > This was before digital came along in preamp signal chains, newer ones may > be doing a sliding loudness against level thing. Good point! To funny, I'm using such an amp, but doesn't use the amp's automagical EQ. For my Pioneer amp there is no loudness switch, but a switch to bypass the EQ, named "direct". If the EQ isn't bypassed, than the EQ does effect the signal more at low levels, than at loud levels. However, even if the EQ is in 0 (neutral) position, the sound is manipulated. My amp is an old analog amp and this "sliding loudness against level thing" is a PITA. FWIW my amp is not a good amp, but it anyway can be used for mastering. In addition to the speakers I use headphones and listen to the headphones by using the amp, the mixer and the card, this gives an impression about the biased signal. In a home studio we can have the best amps and speakers and anyway could experience issues. Unlikely that there is a chance to position the speakers correct, at least I can't do it in my too small music room. This doesn't mean that mastering has to be less good than done in a professional studio, it just takes much more time. _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
