On Thu, August 8, 2013 4:10 am, Roger Weinheimer wrote: > **** List of PLAYBACK Hardware Devices **** > card 0: SoundByLayout [SoundByLayout], device 0: Master [] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 1: default [USB Audio DAC ], device 0: USB Audio [USB Audio] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > **** List of CAPTURE Hardware Devices **** > card 0: SoundByLayout [SoundByLayout], device 0: Master [] > Subdevices: 1/1 > Subdevice #0: subdevice #0 Ok, going back to your original post :) You do show both cards, good. Your USB card is playback only, but that is what you are trying to do, so that is ok. The portion of /var/lib/alsa/asound.state that you show is for the internal card. That may mean your USB card has no controls which is ok, it just means volume can only be changed at the card or is always "100%". I find alsamixer easiest to use to check that. You used a commandline of: alsaplayer /path/filename.flac Generally for trouble shooting I would hit the card directly: alsaplayer -i hw:1,0 filename.flac aplay --device=hw:1,0 filename.flac may still get errors -- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
