On 07/04/2013 01:26 AM, Clemens Ladisch wrote:
david wrote:
On 07/03/2013 10:27 PM, Clemens Ladisch wrote:
Any rrror messages? In the system log?
According to syslog, it's finds and sets up both the USB device and
the Intel snd_intel8x0 just fine. No errors there. OK, so I guess
they're loading. But ALSA still insists there are no soundcards. Does
ALSA have a log somewhere?
That is the ALSA log.
Do you have the device nodes in /dev/snd/? Are they accessible for
your user?
The only two showing are seq and timer. Both are accessible to the audio
group, which I'm part of.
If I watch the screen during bootup, it's udev timing out when trying
to do something with the USB controller the USB card is connected to.
Is that the message? "doing something ... timed out"?
Let me see if I can scroll lock the display long enough to note down
exactly what it reports. OK, here goes!
udevd[418]: failed to execute '/lib/udev/[mtp-probe' 'mtp-probe
/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2 1 3': no such file or
directory
udevd[420]: failed to execute '/lib/udev/[mtp-probe' 'mtp-probe
/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1 3 2': no such file or
directory
udevd[446]: failed to execute '/lib/udev/[mtp-probe' 'mtp-probe
/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1/1.4/1-1.4.4 1 7': no
such file or directory
udevd[391]: 'sbin/modprobe -b
pci:v00008086d000024C5sv00001179sd00000241bc04sc01i00' [396]
udevd[391]: 'sbin/modprobe -b
pci:v00008086d000024C5sv00001179sd00000241bc04sc01i00' [396] terminated
by signal 9 [Killed]
udevd[378]: 'sbin/modprobe -b
usb:v088Bp2902d0100dc00sc00do00ic01sc01ip00in00' [501]
udevd[378]: 'sbin/modprobe -b
usb:v088Bp2902d0100dc00sc00do00ic01sc01ip00in00' [501] terminated by
signal 9 [Killed]
Later there's an entry saying alsactl failed to restore, no sound cards
found.
PCI devices 1d.1 and 1d.7 appear on lspci:
00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller (rev 03)
USB controller 1 is this device on lspci:
00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
The built-in Intel audio is pci device 1f.d.
The USB audio is this device from lsusb:
Bus 003 Device 002: ID 08bb:2902 Texas Instruments PCM2902 Audio Codec
Don't know how to map from USB controller to bus.
--
David
gnome@xxxxxxxxxxxxx
authenticity, honesty, community
http://dancingtreefrog.com
http://clanjones.org/david/
http://dancing-treefrog.deviantart.com/
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
