so in that case if i need to use a dynamic mic and one condenser mic and i have to one TRS (for dynamic) to avoid feeding the phantom power .. in this case what would i do !
On Wed, May 22, 2013 at 2:24 AM, Len Ovens <len@xxxxxxxxxxxxx> wrote:
Just a quick addition. The below describes how to change the
On Tue, May 21, 2013 11:31 am, Robin Gareus wrote:
> [message re-arrange to avoid top-posting]
> On 05/21/2013 04:52 PM, Axax wrote:
>> On 05/21/2013 09:30 AM, Abhayadev S wrote:
>>> Hi,
>>>
>>> Anybody had tried using the Focusrite Scarllet 8i6 on Ubuntu Studio
13.04?
>>>
>>> So far it was not supported under ALSA but from 13.04 it seems it is
been detected and the JACK is able to list out couple of I/Os.
>>>
>>> Last day i just booted up a live version of the 13.04 and was bale to
do couple of i/o routing. Jack lists 8 inputs and 12 outputs. It seems
the Inputs 1 to 4 (analog mic/line-ins) are listed as Inpiuts 1 to 4
and 2 SPDIF are 5 and 6. But i am not sure about the 7 and 8. I am
getting the same SPDIF signal on these inputs too !
>>> The output 1 to 4 are Monitors output (1&2) and extra outputs (3&4) on
the backside of the box. And 5&6 seems to be SPDIF outputs. Still have
6 more outputs to be listed/clarified.
>>>
>>> Just going ahead with further analysis and if anybody out there has
any thing to add on please do so..
>>>
>>> Regards,
>>> Abhayadev S
>>> http://sites.google.com/site/abhayadevs
>>> http://sites.google.com/site/astudioindia
>>>
>
>> Hi,
>>
>> I've the same audio card. It's working as you described, but I can't
figure out hot to change the input mode for the channels 1-2 from MIC
to LINE/instr!
>> Anybody have a clue?
line/instrument inputs back and forth. Mic to line is automatic. If you
plug into the XLR it is mic mode and into the 1/4inch TRS (or TS) it is
line/instrument mode.
>>
>> A.
>>
>
> see
> https://focusritedevelopmentteam.wordpress.com/2012/04/23/linux-and-focusrite-novation-products/#comment-51
>
> https://github.com/x42/alsa-driver/tree/s18i6 adds full mixer support
for the 18i6. According to Focusrite the same will also work for the 8i6
-- but I lost interest in Focusrite devices for various reasons.
>
>
> Short of patching the alsa kernel driver or using another OS to change
device config, you can use https://github.com/x42/scarlettmixer to
change the config on GNU/Linux. It's not a ready-to-use app, however:
>
> 1) rmmod snd_usb_audio # so that python script can access the device 2)
change the python script line 31 to detect the 8i6
> 3) tweak the "example code" line 492..
> the "line/inst" switch is there as sw_impedance()
> 4) modprobe snd_usb_audio # ...
>
> best,
> robin
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
