On Sat, April 13, 2013 4:41 am, Gabbe Nord wrote: > Hey again all, and thank you very much for your replies! > > If possible, I'd love to use both analogue and S/PDIF ins at the same > time, > but I can live with having to restart JACK and switch if necessary. > I'm pretty sure the card should let me clock everything together, so how > would I do the device combining? > > Here's how my QASMixer looks: > http://www.imagebam.com/image/c260db248663422 > Maybe that can be a lead? > > I'm at a halt here, I don't know how I should go about testing and > tweaking > this more. Those should all be outputs... there is a little microphone icon at the bottom that should show the inputs when clicked. From what you have there it looks like you can monitor all 4 inputs... stereo analog and stereo s/pdif. This doesn't mean anything so far as where your inputs are. Looking at the block diagram of the 1724, the output mixing is internal and apart from the pci IF. The good thing being that in order to be able to mix them like that they should be in sync. You should be able to move an input from spdif left to spdif right to line left to line right and get sound out without touching anything on your mixer... this is still not inputs into the computer, just direct monitor. QAS should let you see inputs as well as outputs at the same time. -- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
