Re: Any HW and SW based backing-band solutions?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2013-04-03 at 09:30 +0200, Jostein Chr. Andersen wrote:
> The problem here is that it's only one output (Line/Phones - 22 ohms)
> that gives way to low output for line level, are someone aware of a
> decent pre amp (DIY is ok) that can be plugged into line input level
> in a mixer?

I don't like to use headphone outputs, but a mixer should be able to be
used with the signal from a headphone output. A phones output unlikely
will produce a too low level for a line input.

What mixing console are you using?


_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user




[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux