On Sun, March 3, 2013 6:29 am, Gabbe Nord wrote: > Hello Jeremy, and thank you so much for your reply! > > I disabled SpeedStep in BIOS, and it helped a little, thanks! Also hyperthreading? if you have only one cpu you may have to disable cpu1 in the boot command line if the bios doesn't allow this. > Here's my > interrupts: > > zth@zth:~$ cat /proc/interrupts > CPU0 CPU1 CPU2 CPU3 > 0: 43 0 1 1 IO-APIC-edge timer > 1: 3 0 0 0 IO-APIC-edge i8042 > 8: 1 0 0 0 IO-APIC-edge rtc0 > 9: 0 0 0 0 IO-APIC-fasteoi acpi > 12: 4 0 0 0 IO-APIC-edge i8042 > 23: 412535 22606 20 25 IO-APIC-fasteoi > ehci_hcd:usb1, ehci_hcd:usb2 This is not great, both USB are on the same irq. do you use a USB mouse or KB? That could cause problems. If you have the plugs for mouse and KB use them even if you need adapters. Some bios let you tell the bios not to set irqs for the USB or video. That might help as Linux seems to be a bit more inteligent at doing it. In the end usb1 and usb2 may be hardwired to the same irq. That probably means you can only use one of them. Laptop or desktop? in either case a USB card may help. > 41: 12871 435 437 292 PCI-MSI-edge ahci > 42: 0 0 0 0 PCI-MSI-edge > xhci_hcd > 43: 67 9 3 8 PCI-MSI-edge eth0 > 44: 9 3 1 0 PCI-MSI-edge mei > 45: 78 161 80 19 PCI-MSI-edge > snd_hda_intel > 46: 87524 15 46 18 PCI-MSI-edge > radeon > 47: 29 0 0 0 PCI-MSI-edge > snd_hda_intel -- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
