Re: mixing advice/assistance needed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/14/2013 02:57 PM, Thomas Vecchione wrote:



On Thu, Feb 14, 2013 at 8:14 AM, Fons Adriaensen <fons@xxxxxxxxxxxxxx
<mailto:fons@xxxxxxxxxxxxxx>> wrote:

    On Thu, Feb 14, 2013 at 01:40:23PM +0100, Brendan Jones wrote:

     > Just personal preference, but I think both of these have an
     > unacceptable amount of hissing that is not present in the original.

    The original had most of the signal above 2kHz or so almost gone, so
    this had to be boosted. Tape hiss gets amplified in the same way (this
    was a _casette_ recording). It's probably possible to remove some of
    the hiss using an FFT-based multiband expander.


Which is pretty much exactly what I did.  I used WaveARTs MRNoise for
this purpose, I have access to Izotope RX2 as well, but given that the
signal there is so weak, I didn't use that in a destructive manner, and
I am finding I prefer wavearts for primarily high frequency noise.
However since RX2 is a new acquisition for me I am still learning their
strengths and weaknesses.

     > Can you explain what you did exactly

    Second order shelf filter, +12 dB or so at 4 kHz and above. There were
    some faint traces of signal around 8 kHz, so a very narrow band around
    that frequency was boosted a few dB more.


Heh it is very interesting to hear you describe it, as I didn't look at
the signal analysis at all when I did mine, but also put in a fairly
sharp lowpass filter at 12k as I didn't hear anything usable above that
when I boosted.  Now I am curious to go back and try out what you
describe as well as look at the statistical analysis and see if it can
be improved a bit more or not, I just don't have time these days sadly.
This was a quick 15 minute project or so to see what I could do out of
my own curiosity while I had some spare time before a meeting.

I listened to yours as well, and I'd say it is the cleaner of the three, however it still does exhibit the same problems as the original (namely the highs need to be boosted)
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user


[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux