On Sat, 26 Jan 2013 23:36:32 +0100, Bob van der Poel <bob@xxxxxxxxxxxx>
wrote:
I've decided that the only way I'm going to get my system to record
anything decent is to use jackd. But, I'm being a total idiot with
this ...
First off, I have the the following devices:
bob$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC883 Digital [ALC883 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
The 2nd one is a spdif speaker attached to the mother board. For now,
lets try to get jack working with this.
pasuspender -- jackd -d alsa "ALC883 Digital"
(BTW, I tried hw0,1 and some other combinations ... but they are the
same results)
After the command I get:
bob$ pasuspender -- jackd -d alsa "ALC883 Digital"
jackd 0.121.2
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben
Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2
periods
ALSA: final selected sample format for capture: 32bit integer
little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer
little-endian
ALSA: use 2 periods for playback
JACK: unable to mlock() port buffers: Cannot allocate memory
JACK: unable to mlock() port buffers: Cannot allocate memory
**** alsa_pcm: xrun of at least 0.033 msecs
Which seems to be okay?
Now, I run audacity. Got jack as an output option and load a file.
Play it ... the VU meter shows, but no audio. NADA. Just silence.
If I can't get a simple play to work, I fear becoming a recording star
is out of my reach!
Please, this shouldn't be that hard???
No need to use jackd with audacity, unless you are thinking of feeding it
audio from other software - in which case I would recommend using a DAW,
not an audio editor like Audiacty. Something like Qtractor or Ardour may
suit you better.
Also, why not use a jack control application, such as qjackctl?
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
