On Tue, January 22, 2013 1:26 pm, Bob van der Poel wrote: > Anyone with experience using the UCA202? I tried it the other day > using audacity and found that it played and recorded just fine if it > was only doing one or the other. But, if I had existing tracks in > audacity and played those (only 1 stereo) and recorded a 2nd track ... > the recorded track sounded like it was filtered though a motorboat > engine (sputter, sputter ...). > > I did the recording again directing the output to an existing device > and all worked fine. So the setup seems to be useable. I am thinking > that audacity (alsa?) can't read+write to the device? > > I'm running Ubuntu 12.04. Didn't have jack running. I have found with USB audio, I have to find a USB plug that has it's own IRQ. For example I have: 16: 12488044 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, i915, ath9k 17: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 That USB2 is the left side plug on my machine, the usb3 is the right... I only use the one on the right. I also have found I have to unload the wireless kernel module as it's once a minute scan gives xruns... once every five seconds if wireless is disabled. -- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
